Berkeley Series Toilet Repair Parts
Finding replacement parts for your gravity flush Eljer Berkeley just got a whole lot easier. If you're looking for fill valves, flush levers or even a reservoir, you'll find it here on PlumbingSupply.com®!
Order replacement parts for the Berkeley one-piece toilet model numbers below:
Repair Parts for the Eljer Berkeley Series Toilet
One-Piece Models # 081-1590 & 081-1595
Not sure which model toilet you have? Try looking under the toilet tank lid or inside of the toilet tank.
Related Items & Information
Eljer Toilet Parts By Series
Frequently Asked Questions
Q. "I installed a new fill valve and my new valve comes on (and then goes off) for a few seconds about once per hour?"
A. This could be caused by many things. The most common is with a Fluidmaster 400. This is a great valve but be sure to install the 1/4" tube per their instructions. Use the clip that comes with it and do not just stick it into the overflow tube or it will go on and off every so often by itself. If that isn't it, take some food coloring and place it in your tank. Wait a few hours and if some of the color has gone into the bowl then you probably need a new flapper.
Q. "My Universal Rundle toilet tank has a tilt valve. How does the Fluidmaster 400A fill valve allow the bowl to refill?"
A. If you are using a Fluidmaster 400A then you must also use the Fluidmaster #599 refill tube & clip. The clip attaches to the back of the tank and keeps the 1/4" refill tube pointed towards and into the overflow tube of the tilt valve. The 1/4" refill tube must not be attached directly into the overflow tube. There must be an air break between the refill tube and the overflow tube to keep the 400A from siphoning the water in the tank and putting it into the bowl continuously causing the 400A to turn on and off continuously.
Q. "How long 'should' the parts inside of my toilet last?"
A. That depends on a number of variables and which parts. Water quality is one of the major factors. If your water source is heavily chlorinated then many parts won't last long. Or if you have a lot of sand or grit or have a low pH or "aggressive" water source then parts simply won't last as long as the 'average' length of time. Also the quality of the parts matters. The replaceable parts such as flappers and washers/seals generally will last at least 4 to 5 years on "average." If you use a chemical bowl cleaner some flappers won't even last one year. However, some toilet bowl cleaners isolate cleanser from the internal workings of the toilet therefore, maximizing the life of your toilet parts. If your flapper has black "goo" on it then it is either due to age or quality of your water and if it feels soft then it's best to change it.
Have questions about toilet parts or toilet repair?
Read our comprehensive Toilet Repair Information & FAQs to learn how your toilet works, how to find the right replacement parts, and how to fix common problems.
"I just wanted to let you know how excellent your service has been! I ordered some parts for my Eljer toilets, and the response was fast and the products were perfect. I was also impressed with the automated follow-up emails confirming my order and providing tracking. I was more than pleased with the quality of the seats I ordered, so much so that I even ordered two more for my other Eljer Berkeley model toilets. we never had soft-close toilet seats before... or simple remove toilet seats for easy cleaning. What will they think of next?"
- Don Sowar, Walnut Creek, California 94596-6518
"I'm impressed with your level of customer service."
- Greg Jones, South Dartmouth, Massachusetts, 02748
Please note that every customer testimonial shown on our pages has given us written permission to quote them. Our customer's privacy is very important to us, and we will never give, share or sell contact information or e-mail addresses to anyone!
return to top ↑