| 1 |
495-0260-00 |
Fill Valve (Ballcock) WITH Diverter Assembly - 11" overall height, 9" from toilet tank to top of valve, includes slip joint nut and washer, friction ring, shank nut and washer, and Float Rod, float ball sold separately - (View old version) |
Discontinued |
| 1B1X-WF |
"Will-Fit" Fill Valve WITHOUT Diverter Assembly - includes slip joint nut and washer, friction ring, shank nut and washer, and float rod (float ball sold separately) |
$51.57 |
Enter a quantity and
|
| 2 |
495-0184-00 |
Diverter Assembly only - works with fill valve 495-0260-00 ONLY (WILL NOT work with 1B1X-WF) - (View old version) |
$57.70 |
Enter a quantity and
|
| 3 |
495-0187-00 |
Fill Valve Repair Kit |
Discontinued |
| 4 |
495-5517-00 |
Flush Valve Body only - WITH Holes - For toilets made before the mid 90's
The 495-5517-00 WITH holes has been replaced by the 495-5517-00 WITHOUT holes.
We suggest purchasing recommended tool for installation and removal of flush valve 495-5517-00
|
Discontinued |
| 495-5517-00-NH |
Flush Valve Body only - WITHOUT Holes - For toilets made after the mid 90's
We suggest purchasing recommended tool for installation and removal of flush valve 495-5517-00-NH |
Discontinued |
| Tool |
Flush Valve Wrench - for installing and removing original flush valves (not shown above) - view an example of this tool in use |
$16.95 |
| 723X |
Possible replacement flush valve "will fit" - Includes internal plastic wrench - Valve may need to be cut down to fit, altered valves are non-returnable
- view "will fit" dimensions |
$19.99 |
Enter a quantity and
|
| 5 |
495-6031-00 |
Flapper and 4-1/2" Beaded Chain only (no hook) |
$8.79 |
| "Will Fit" |
Replacement Ultra Water Saver "Will Fit" Flapper with 8" kink-resistant link chain and hook - provides maximum flush |
$6.15 |
Enter a quantity and
|
| 6 |
596-0215-00 |
Push Button Assembly - Chrome |
$51.14 |
Enter a quantity and
|
| 7 |
495-6012-00 |
Bolt Covers (2) - White |
Discontinued |
| 8 |
1B1XTOP |
Top Assembly only for Original Fill Valve 495-0260-00 - 2 1/4" center to center holes - (not interchangeable with Will-Fit 1B1X Top Assembly) - Includes 2-piece plastic top assembly and 3 screws |
Discontinued |
1B1X-TOP
"Will-Fit" |
Top Assembly only for the "Will-Fit" 1B1X - 2 1/8" center to center holes - (not interchangeable with OEM 1B1X Top Assembly) - Includes 2-piece plastic top assembly and 3 screws
Note: We recommend the purchase of the 1B1X-KIT will-fit repair kit (directly below) if purchasing this 1B1X-TOP-WF (your old plunger assembly may not fit into new top assembly) |
$8.03 |
Enter a quantity and
|
| 9 |
1B1XKIT
(Will-Fit) |
"Will-Fit" Plunger Repair Kit for 1B1X fill valve |
$7.21 |
Enter a quantity and
|
Not
Shown |
Float Ball |
"Will Fit" Plastic Float Ball |
$3.70 |
Enter a quantity and
|
Not
Shown |
Float Rod |
"Will Fit" 9" Brass Float Rod - click here for more sizes |
$2.25 |
Enter a quantity and
|
