Savona Series Toilet Repair Parts
by American Standard
The Savona has a subtly sleek style that looks great in any home, and since it is often less expensive and easier to repair your toilet than to replace it, we here at PlumbingSupply.com
® are pleased to offer the replacement parts you need to keep the Savona in top condition - flush valves, flappers, trip levers, and more can be found here. We are pleased to offer all the American Standard parts you're looking for.
Original Savona - 2095/2097
American Standard Toilet
Order replacement parts for the Savona toilet below
New Savona - 2097
Replacement Parts for the Savona Series Toilets
One Piece Models - #2095.012 (round front), 2097.014 (elongated front)
Not sure which model toilet you have? Try looking under the toilet tank lid or inside of the toilet tank.
Replacement Parts for the New Savona Series Toilets
One Piece Model - #2097.012 (elongated front)
American Standard Toilet Parts By Series
For pictures of American Standard toilets, click here
Frequently Asked Questions
Q. "I installed a new fill valve and my new valve comes on (and then goes off) for a few seconds about once per hour?"
A. This could be caused by many things. The most common is with a Fluidmaster 400. This is a great valve but be sure to install the 1/4" tube per their instructions. Use the clip that comes with it and do not just stick it into the overflow tube or it will go on and off every so often by itself. If that isn't it, take some food coloring and place it in your tank. Wait a few hours and if some of the color has gone into the bowl then you probably need a new flapper.
Q. "My Universal Rundle toilet tank has a tilt valve. How does the Fluidmaster 400A fill valve allow the bowl to refill?"
A. If you are using a Fluidmaster 400A then you must also use the Fluidmaster #599 refill tube & clip. The clip attaches to the back of the tank and keeps the 1/4" refill tube pointed towards and into the overflow tube of the tilt valve. The 1/4" refill tube must not be attached directly into the overflow tube. There must be an air break between the refill tube and the overflow tube to keep the 400A from siphoning the water in the tank and putting it into the bowl continuously causing the 400A to turn on and off continuously.
Q. "Are all American Standard® parts 'standard' and are ALL their products and parts made in America?"
A. A number of their products are made overseas (as is the case with many other plumbing manufacturers as well). Please do not assume that all products made by American Standard (Am. Stan.) are made in the U.S. The word "standard" and "American Standard®" are NOT identical. Most of their faucet parts will only fit their brand (as is the case with their competitors as well). Many of their toilet parts will only fit their brand of toilet. Not all of American Standard® parts are universal ("standard"). We get this question frequently, and it is probably because some people assume that since they have the word "standard" as part of their name that they must be using parts that are "standard"; as in universally fitting. Just as car bumpers don't fit on all brands of cars, parts for "standard" toilets and faucets will generally not fit on other brands. Generally you must buy parts specifically made for (designed to fit) your specific brand of toilet/faucets, etc.
Have questions about toilet parts or toilet repair?
Read our comprehensive Toilet Repair Information & FAQs to learn how your toilet works, how to find the right replacement parts, and how to fix common problems.
return to top ↑