Clifton Series Replacement Toilet Parts

by Universal Rundle

The smaller bowl and 10" height of the Clifton toilet makes it ideal for preschools, kindergarten classrooms, and daycares. Keep your Clifton toilet running strong for years with the right replacement parts. Whether you need a trip lever or a flush valve, you'll find it here on PlumbingSupply.com®! And if you need more Universal Rundle parts, you'll find them right on our page.

Clifton two-piece toilet

Replacement Parts for Clifton Series Toilet
Two-Piece Model (Child-Size Bowl) - Tank 4471

Clifton toilet repair parts

Model & Service Years Description Part # Price & Quantity
Clifton Toilet
Model: 4471
Made after March 1996
Ballcock - Replaced by #400A
- Click and go to 400A repair parts
148
149
$16.62
Flush Valve - 7" tall - Replaced by "Will-Fit"
"Will-Fit" flush valves may need to be cut down to height of original valve - can use any type of saw (wood saw, hack saw, etc.) - Please note altered valves are non-returnable.
270 $14.99
Float Rod (8") - Replaced by #120 - (for original 148 or 149 ballcock) 129 $2.25
Float Ball - (for original 148 or 149 ballcock) 102 $3.70
Trip Lever - Chrome - Replaced by "Will Fit" PRO64 344 $9.95
Replacement flapper - red - chemical resistant $4.17
Tank To Bowl Gasket - Recessed - #WA75 "Will-Fit" -- $4.39
Tank To Bowl Bolt Set - Stainless Steel -- $6.39

- OR - View Cart

Not sure which model toilet you have? Try looking under the toilet tank lid or inside of the toilet tank.


Related Items & Information




Frequently Asked Questions

Q. "I installed a new fill valve and my new valve comes on (and then goes off) for a few seconds about once per hour?"
A. This could be caused by many things. The most common is with a Fluidmaster 400. This is a great valve but be sure to install the 1/4" tube per their instructions. Use the clip that comes with it and do not just stick it into the overflow tube or it will go on and off every so often by itself. If that isn't it, take some food coloring and place it in your tank. Wait a few hours and if some of the color has gone into the bowl then you probably need a new flapper.

Q. "My Universal Rundle toilet tank has a tilt valve. How does the Fluidmaster 400A fill valve allow the bowl to refill?"
A. If you are using a Fluidmaster 400A then you must also use the Fluidmaster #599 refill tube & clip. The clip attaches to the back of the tank and keeps the 1/4" refill tube pointed towards and into the overflow tube of the tilt valve. The 1/4" refill tube must not be attached directly into the overflow tube. There must be an air break between the refill tube and the overflow tube to keep the 400A from siphoning the water in the tank and putting it into the bowl continuously causing the 400A to turn on and off continuously.

Have questions about toilet parts or toilet repair?

Toilet Repair Information & FAQs


return to top ↑

Copyright© 1995-2023 PlumbingSupply.com.
All Rights Reserved.