Athens Series Replacement Toilet Parts

by Universal Rundle

Your Athens toilet should last for many years to come, and repairing it is a breeze with replacement parts from your friends at PlumbingSupply.com®! From flush valves to float rods, we have it. Looking for more Universal Rundle parts? Click here.

Athens two-piece toilet

Replacement Parts for Athens Series Toilet
Two-Piece Model - Tank 4491

Athens toilet replacement parts

Model & Service Years Description Part # Price & Quantity
Athens Toilet
Model: 4491
Made after Nov. 1994
Ballcock - Replaced by #400A
- Click here for 400A repair parts
104 / 105 $12.95
Flush Valve - Replaced by "Will-Fit" 242 / 244 $9.44
"Will-Fit" flush valves may need to be cut down to height of original valve
- Can use any type of saw (wood saw, hack saw, etc.)
- Please note altered valves are non-returnable.
Float Rod (8") - Replaced by "Will-Fit" - Can be cut to desired length. Altered products are non-returnable 127 $2.25
Float Ball 102 $3.52
Trip Lever - Chrome - Replaced by Adjustable "Will-Fit" Trip Lever 314

- OR - View Cart

Not sure which model toilet you have? Try looking under the toilet tank lid or inside of the toilet tank.


Related Items & Information




Frequently Asked Questions

Q. "I installed a new fill valve and my new valve comes on (and then goes off) for a few seconds about once per hour?"
A. This could be caused by many things. The most common is with a Fluidmaster 400. This is a great valve but be sure to install the 1/4" tube per their instructions. Use the clip that comes with it and do not just stick it into the overflow tube or it will go on and off every so often by itself. If that isn't it, take some food coloring and place it in your tank. Wait a few hours and if some of the color has gone into the bowl then you probably need a new flapper.

Q. "My Universal Rundle toilet tank has a tilt valve. How does the Fluidmaster 400A fill valve allow the bowl to refill?"
A. If you are using a Fluidmaster 400A then you must also use the Fluidmaster #599 refill tube & clip. The clip attaches to the back of the tank and keeps the 1/4" refill tube pointed towards and into the overflow tube of the tilt valve. The 1/4" refill tube must not be attached directly into the overflow tube. There must be an air break between the refill tube and the overflow tube to keep the 400A from siphoning the water in the tank and putting it into the bowl continuously causing the 400A to turn on and off continuously.

Have questions about toilet parts or toilet repair?

Toilet Repair Information & FAQs


return to top ↑

Copyright© 1995-2021 PlumbingSupply.com.
All Rights Reserved.