Celina Series Toilet Repair Parts

by Universal Rundle

Replace your worn out Universal Rundle Celina Seris toilet parts with brand new flush valves and trip levers - among other parts - brought to you by PlumbingSupply.com®! Keep your toilets working like new, and add years to the life of your toilet with just the right replacement parts. Need to replace the tank lid? Visit our page or, for more Universal Rundle parts, click on our page.

Celina two-piece toilet

Replacement Parts for Celina Series Toilet
Two-Piece Model - Tanks 4452/4454

Universal Rundle toilet repair parts, Model 4454

Model & Service Years Description Part # Price & Quantity
Celina Toilet
Model: 4452
Oct. 1968 - Jan. 1976
Ballcock - Replaced by #400A
- Click and go to 400A repair parts
186
205D
$16.62
Flush Valve - Replaced by "Will-Fit"
"Will-Fit" flush valves may need to be cut down to height of original valve - can use any type of saw (wood saw, hack saw, etc.) - Please note altered valves are non-returnable.
253
256-2H
$14.99
Float Rod (9") - (for original 186 or 205D ballcock) 126 $4.97
Float Ball - Replaced by #102 - (for original 186 or 205D ballcock) 103 $3.70
Trip Lever - Chrome
Replaced by comparable Will-Fit tank lever
311
354
Discontinued
PRO64 $9.95
Tank To Bowl Gasket - Recessed - #WA75 "Will-Fit" -- $4.39
Tank To Bowl Bolt Set - Stainless Steel -- $6.39
Celina Anti-Sweat Toilet
Model: 4454
Oct. 1968 - Jan. 1976
Ballcock - Replaced by #400A
- Click to go to 400A repair parts
186
205D
$16.62
Flush Valve - Replaced by "Will-Fit"
"Will-Fit" flush valves may need to be cut down to height of original valve - can use any type of saw (wood saw, hack saw, etc.) - Please note altered valves are non-returnable.
253
256-2H
$14.99
Float Rod (9") - (for original 186 or 205D ballcock) 126 $4.97
Float Ball - Replaced by #102 - (for original 186 or 205D ballcock) 103 $3.70
Trip Lever - Chrome
Replaced by comparable Will-Fit tank lever
311
354
Discontinued
PRO64 $9.95
Tank To Bowl Gasket - Recessed - #WA75 "Will-Fit" -- $4.39
Tank To Bowl Bolt Set - Stainless Steel -- $6.39

- OR - View Cart

Not sure which model toilet you have? Try looking under the toilet tank lid or inside of the toilet tank.


Related Items & Information




Frequently Asked Questions

Q. "I installed a new fill valve and my new valve comes on (and then goes off) for a few seconds about once per hour?"
A. This could be caused by many things. The most common is with a Fluidmaster 400. This is a great valve but be sure to install the 1/4" tube per their instructions. Use the clip that comes with it and do not just stick it into the overflow tube or it will go on and off every so often by itself. If that isn't it, take some food coloring and place it in your tank. Wait a few hours and if some of the color has gone into the bowl then you probably need a new flapper.

Q. "My Universal Rundle toilet tank has a tilt valve. How does the Fluidmaster 400A fill valve allow the bowl to refill?"
A. If you are using a Fluidmaster 400A then you must also use the Fluidmaster #599 refill tube & clip. The clip attaches to the back of the tank and keeps the 1/4" refill tube pointed towards and into the overflow tube of the tilt valve. The 1/4" refill tube must not be attached directly into the overflow tube. There must be an air break between the refill tube and the overflow tube to keep the 400A from siphoning the water in the tank and putting it into the bowl continuously causing the 400A to turn on and off continuously.

Have questions about toilet parts or toilet repair?

Toilet Repair Information & FAQs


return to top ↑

Copyright© 1995-2023 PlumbingSupply.com.
All Rights Reserved.