Sinkmaster Elite II 1500 Disposer Replacement Parts

by Anaheim Manufacturing

Looking for those hard to find Sinkmaster Elite II replacement parts? Look no further than your friends at PlumbingSupply.com®! Whether you need a splash guard, stopper, or even the endbell assembly, you can find it here. Need other disposal products? visit our page.

Sinkmaster Elite II Series - Model 1500
Item
#
Description Price & Quantity
1 Stopper
Only available in kit (item #1 & 2)
Discontinued
see item #1 & 2
2 Splash Guard only $5.81 Enter a quantity and
1-2 Stopper & Splash Guard $8.52 Enter a quantity and
3 OEM Sink Flange
Only available in assembly kit (item #1-8)
Discontinued
Alternative Sink Flange - Chrome
other designer finishes available
$72.63 Enter a quantity and
4 Rubber Gasket (Thin) $2.89 Enter a quantity and
Will-Fit Rubber Gasket (Thick)
- install ridges up towards underside of sink
$2.94 Enter a quantity and
5 Waxed Fiber Gasket $2.84 Enter a quantity and
6 Support Ring $4.91 Enter a quantity and
7 Mount Ring
Only available in assembly kit (item #1-8)
Discontinued
8 Cushion Mount Ring $4.83 Enter a quantity and
1-8 Sink Flange Assembly - Chrome
contains items #1-8
$26.10 Enter a quantity and
9 Outlet Screws (2 pack) $2.34 Enter a quantity and
9-10 Outlet Flange & 2 Screws
Only available in the kit (item #9-12)
Discontinued
11 Outlet Elbow Discontinued
Outlet Alternative (12" Tailpiece)
other tailpiece sizes available
Note: outlet gasket sold separately below
$2.33 Enter a quantity and
12 Rubber Outlet Gasket $2.59 Enter a quantity and
9-12 Outlet Drain Elbow & Gasket Kit
includes items #9-12
$9.48 Enter a quantity and
13 Grind Ring
2 grind rings needed
Discontinued
Sinkmaster Elite II Series - Model 1500
Item
#
Description Price & Quantity
14 Drain Housing Discontinued
15 Thrust Washer Discontinued
16 Water Seal Discontinued
17 Spacer Seal Discontinued
18 Slinger Discontinued
19 O-Ring Discontinued
20 Turntable Discontinued
21 Hopper Assembly Discontinued
22 Hopper Screw (each)
4 hopper screws needed
$2.35 Enter a quantity and
Hopper Screws (4 pack)
4 hopper screws needed
$8.88 Enter a quantity and
23 Washer Discontinued
24 Armature Assembly Discontinued
25 Motor Stud Discontinued
26 Motor Stud Discontinued
27 Motor Shell Assembly Discontinued
28 Endbell Discontinued
29 Motor Brush & Spring Assembly
2 brush & springs needed
Discontinued
30 Hex Nut (each)
2 hex nuts needed
$2.35 Enter a quantity and
Hex Nuts (2 pack)
2 hex nuts needed
$4.43 Enter a quantity and
31 Inspection Plate Discontinued
32 Inspection Plate Nut Discontinued
33 Shell Screw
3 shell screws needed
Discontinued
34 Lower Shell Discontinued

Related Items & Information

Frequently Asked Questions

Q. "My garbage disposer smells! Is there anything that I can do besides buying a new one?"
A. Generally the simple solution to this is to clean the disposer by having it grind up a few cups of ice and some table salt. This helps to cut the grease and slime off the sides of the disposer. Then flush it out with cold water followed by half of a lemon or lime to deodorize.

Q. "I've heard that garbage disposer waste harms septic tanks. Any truth to that?"
A. We have yet to read any study that reflects that. Some cities have banned disposers/disposals/garborators and then, later changed their minds and allowed them, such as New York. From what we know, food disposer waste gets consumed by bacteria in sewage treatment plants and septic tanks.

Q. "I installed my new disposer into a stainless steel sink but the thin gasket I used that came with the disposer keeps the flange slightly raised above the inside of the sink. Small amounts of water do collect around the flange. Should I have used plumbers putty?"
A. Some disposal manufacturers recommend using the rubber gasket that comes with the disposer. However, other disposer manufacturers recommend using plumbers putty. We believe if the flange is properly installed using plumbers putty, the installation will provide a seal for a longer length of time than the rubber gasket. When a flange is installed with plumbers putty the putty will keep water from leaking through it. The plumbers putty will also stay pliable over time. As the sink is used water comes in contact with the plumbers putty which slowly absorbs into the putty. The water actually acts as a lubrication for the putty and helps keep it from drying out. This is why sink flanges installed with plumbers putty can function for 20 years or more without leaking. If the sink is not used for 4 months or longer the putty will begin drying out which will lead to leakage when the sink is again used. If you have more confidence in using the rubber gasket and can live with small amounts of water left in your sink, then by all means use the rubber gasket.

It is the opinion of our Founder Vic that garbage disposers are not garbage cans, therefore, should not be used as such. Most potatoes peels, carrots and the like will not get chopped up well (with any brand), and can help clog your drain lines. He feels that food (garbage) disposers should be used sparingly. Much of what goes into your drains eventually has to be removed by sewage treatment facilities or be dealt with by some system.

Customer Testimonials

"I had looked EVERYWHERE for this particular part, and could never find it. On a whim last week I finally got smart and did a search online, and I found your wonderful company. And the part I needed!! Within a few days, and for a reasonable price, I had a new splash guard and stopper for my old sink. I was ecstatic!! It really IS the little things that make a difference! No more smelly splash guard, no more splash guard flipping up, just a nice new part!"
- Rachael Hedgcoth, Overland Park, Kansas 66212

"I ordered that rubber disposal part late Wednesday night, they gave me the tracking code Thursday morning, the part was in my mail box tonight (Saturday) and it fit perfectly. I must have died and gone to Heaven... Thanks again for your great service."
- Ray Finucane, Livermore, California 94550-5441

"Thank you for the prompt shipments and great parts that fit perfectly."
- Del Hanks, Millville, Utah 84326-0087

Please note that every customer testimonial shown on our pages has given us written permission to quote them. Our customer's privacy is very important to us, and we will never give, share or sell contact information or e-mail addresses to anyone!

return to top ↑

Copyright© 1995-2023 PlumbingSupply.com.
All Rights Reserved.