Diverter Aerators, Faucet Aerators &
Faucet Adapters For Kitchen Faucets
From water savings to kinder flow, faucet aerators are small but necessary parts of any faucet set up. If you have ever run a faucet without an aerator, you realized the purpose of an aerator. Without one, water sprays out with unpleasant force and causes splashing. Mixing air into the flow of water produces a steadier, more stable stream - but sometimes aerators get worn out and need replacing. Let PlumbingSupply.com® be your source for replacement faucet aerators and many other plumbing products.
Not sure what type of aerator you need? Confused about what an aerator does?
Check out our Guide to Faucet Aerators
for more information!
These easy-to-install aerators allow you to adapt your faucet for use with a countertop filter and other diverter-operated systems, such as countertop filtration units, dishwashers, watering hoses, etc.
These aerators have diverters for hooking items like a countertop water filter to your kitchen faucet:
Note: These aerators use 1/4" O.D. Tubing
Note: You may need an adapter in order to attach these to your spout - see section below:
Is your spout FEMALE or MALE threaded?
Spout shown with FEMALE threadsAttaches to your female threaded spout with adapter
Spout shown with MALE threadsAttaches directly to your male threaded spout
If your spout has FEMALE threads, then you'll need an adapter* in order to use the diverter aerators at the top of the page
*May not fit all faucets
Non-Diverting Faucet Aerators
Looking for vandal resistant aerators?
Need a water saving low flow aerator?
What about antimicrobial aerators?
Unique Aerators, Adapters & Accessories
Sometimes you need an aerator with threads on both ends. Maybe you're hooking up your new dishwasher hoses or have another attachment you'll need on a faucet. Whatever you are looking for, we're sure you'll find it at PlumbingSupply.com®!
Not all faucets are created equal, but uniquely sized or constructed faucets deserve a good aerator too! Luckily, we offer a range of faucet adapters to help you enjoy the benefits of an aerated water flow from your one-of-a-kind faucet.
Please note: While we strive to ensure every product we label as "Made in the USA" really is 100% made in the USA, it is also important to understand that sometimes manufacturers make changes to their products, or for various reasons may receive components or materials that they would normally purchase domestically from an overseas supplier - and they don't necessarily let distributors (like us!) know that they've changed something about the product or where it is manufactured.
If you receive a product that PlumbingSupply.com® says is "Made in the USA" and the product states it was manufactured elsewhere, please contact us. We will happily replace or refund your purchase to your satisfaction.
Frequently Asked Questions
Q. "I can't see what the functional differences are among the different diverter aerator models?"
A. In all models, including the "with outlet", the left-hand-side outlet is where the water is diverted to. On the ADVSR-1, there is what appears to be two outlets. However, the top is the diverter, the bottom is an inlet and then there is a small spigot just below the two where the water comes back through (this acts as an outlet for the returning water, therefore, it is called a "with outlet".) The ADVS-4 is a swivel (meaning that the top threads will turn separately from the rest of the adaptor). The ADVS-4 and ADVSR-1 both have a pull out button for diversion, and the ADVP-4 is a pull-down model. All come with the most common female aerator threads, which will fit most (but not all) U.S. made faucets that require a female threaded aerator. If you need male threads on your adapter (meaning your aerator has male threads) then you'll need to order the male-to-male adapter (part number #COUNTMALE) and it screws onto our female spout adapter converting it to male. Then the chances are 90% that it will fit.
Q. "Will the aerators with Male NPSM threads screw fit into Female FIPS threads?"
A. Male threads that are NPSM (National Standard Straight Mechanical Pipe Thread) will not screw directly into FIPS (Female Iron Pipe Size) threaded fittings. FIPS threads are tapered and the NPSM are straight threads. Even though they have the same threads per inch and look the same size they will not thread together.
return to top ↑