Replacement Parts for KWC Faucets
We at PlumbingSupply.com® are pleased to offer KWC's most popular repair and replacement parts. Whether you need a new hose, pull-out spray, cartridge, or even o-rings, we've got it! Make us your source for these and many other parts and products.
KWC Ceramic Cartridge
replaces old K.32.60.02 - for Domo, Orcino, Suprimo, Topline, Nova, Luna, Forma and Vita (all single handle faucets)
K.32.60.00
No longer available in the USA
KWC O-Ring Kits
Z.200.219
No longer available in the USA
Z.200.220
No longer available in the USA
KWC Replacement Spray Heads for Pull-Out Kitchen Faucets
For Domo, Suprimo, Topline, Nova, and Vita kitchen faucets - purchased BEFORE 2005
4.5" Handset for 7" Spout
Z.504.228 - Chrome - Discontinued
(Replaced old Z.504.308)
Please note: Due to state mandated low-flow regulations, these spray heads cannot be shipped to California.
If your Domo spray was purchased after 2005, the parts above will not work. See below.
6.75" Handset for 9" Spout
Z.538.101-136 - Matte Black - Discontinued
(Replaces old Z.504.212, Z.504.310, and Z.504.228)
Please note: Due to state mandated low-flow regulations, these spray heads cannot be shipped to California.
If your Domo spray was purchased after 2005, the parts above will not work. See below.
KWC Replacement Spray Heads for Domo Kitchen Faucets
For Domo kitchen faucets - purchased AFTER 2005
4.5" Handset for 7" Spout
(Replaces old Z.504.308)
Please note: Due to state mandated low-flow regulations, these spray heads cannot be shipped to California.
6.75" Handset for 9" Spout
(Replaces old Z.504.310)
Please note: Due to state mandated low-flow regulations, these spray heads cannot be shipped to California.
KWC Handset For Edge Faucet
(Model #10.021.033.xxx)
Z.534.840.000 Chrome
All Finishes Discontinued
Please note: Due to state mandated low-flow regulations, these spray heads cannot be shipped to California.
KWC Handset For Suprimo Faucet
(Model #10.271.033.xxx)
Z.535.524.700 - Stainless Steel
All Finishes Discontinued
Please note: Due to state mandated low-flow regulations, these spray heads cannot be shipped to California.
More KWC Replacement Parts
Please note: Due to state mandated low-flow regulations, these aerators cannot be shipped to California.
Related Items & Information
Frequently Asked Questions
Q. "How do I measure the length of my pull-out KWC handset (just the handset, not the entire spout) to determine if I need a 4.5-inch or a 6.75-inch sprayhead?"
A.The handsets are measured from the threaded end (where your hose screws on) to the tip of the spout, so you should be able to determine the spout you need by unscrewing it from the hose and measuring it from end to end (either 4.5 inches or 6.75 inches).
Q. "Then how do I measure the length of the entire spout (not just the handset)?"
A.The measurement from the center of the faucet (straight down through the handle) to the center of the outlet on the handset is considered the length of the spout itself. If that measurement is 7 inches, then you need the 4.5-inch handset; if the measurement from the faucet center to the center of the outlet is 9 inches, the 6.75-inch handset is the correct replacement.
Q. "Are the aerators for the pull-out spray heads all the same size?"
A.No, the aerators for the pull-out handsets are made to fit only the specified handset they are listed for. They are not interchangeable with other handsets or other spouts.
return to top ↑
