Learn how to quickly and correctly prime and glue plastic pipe (PVC, CPVC, ABS, etc.) for strong, leak-free joints.

PVC, ABS Cements / Solvents

Proudly made in the USA

To find the right cement for your needs, just look at the selection we offer at PlumbingSupply.com®! Choose from PVC or ABS to get the job done, and done right. Let us be your source for these and many more plumbing related products.

Please note: These items must ship via a standard ground carrier (UPS or FedEx) -- and only ships within the continental US. Because these items ship via standard ground methods, glues cannot be shipped to Alaska, Hawaii and U.S. territories.

To ensure our customers receive fresh products, our glues / cements are non-returnable.

Red Hot Blue Glue

Red Hot Blue Glue
  • The finest PVC solvent cement available
  • Red hot is ideal for quick pressurization and demanding conditions
  • Designed to be used on all schedules and classes of PVC pipe through 6", and schedule 80 up to 4"
  • Medium-bodied, very fast set, blue in color
  • One of the best solvents for all PVC applications
  • Works in wet or cold condition applications
  • NSF approved for potable water, gas piping, electrical conduit, drain waste and vents (DWV), and flexible PVC
  • Application brush included
  • LO-V.O.C.
  • 3 year shelf life
  • Made in USA
Red Hot Blue Glue - 1/4 Pint = $6.68
Red Hot Blue Glue - 1/2 Pint = $9.03

- OR - View Cart

PVC Glue / Cement

PVC Cement
  • Works great on PVC pipe & fittings Sch.40 & Sch.80 up to 6" in diameter
  • Suitable for potable water, sewer, drain, waste & vent systems
  • Reduced solvent emissions
  • LO-V.O.C.
  • Medium bodied
  • Gray
  • Brush / dauber included in can
  • Made in USA

Gray PVC Cement - 8 Fluid Ounces = $5.37
Gray PVC Cement - 16 Fluid Ounces = $10.45

- OR - View Cart

ABS Glue / Cement

ABS Cement
  • For all grades of ABS pipes
  • Reduced solvent emissions
  • LO-V.O.C.
  • Black
  • Brush / dauber included in can
  • Made in USA

Black ABS Cement - 8 Fluid Ounces = $5.20

- OR - View Cart

Tips for Gluing Plastic Pipe

Learn how to quickly and correctly prime and glue plastic pipe (PVC, CPVC, ABS, etc.) for strong, leak-free joints.

Related Items & Accessories

Frequently Asked Questions

Q. "What is LO-V.O.C.?"
A. LO-V.O.C. cement produce significantly less amounts of "V.O.C.'s". V.O.C. stands for volatile organic compounds which are unhealthy when breathed or induced. V.O.C.'s also diminish air quality. Please read and follow all directions carefully when applying these cements.

Q. "How do I glue ABS pipe?"
A. To glue ABS pipe, check that any cut ends are fairly straight. Remove any burrs with a knife or emery cloth and clean both pieces with a rag. Apply ABS glue to both the pipe and fitting.

Q. "Do you offer PVC primer?"
A. We have not found a brand of primer that we are confident will not leak in transit. It is highly flammable and in our opinion, too dangerous to ship.

Q. "What is ABS?"
A. Acrylonitrile Butadiene Styrene - it's a thermoplastic used to make molded products such as pipes/fittings.

Q. "What is PVC?"
A. Polyvinyl chloride - it is a very common thermoplastic polymer widely used in pipe systems.

Please note: While we strive to ensure every product we label as "Made in the USA" really is 100% made in the USA, it is also important to understand that sometimes manufacturers make changes to their products, or for various reasons may receive components or materials that they would normally purchase domestically from an overseas supplier - and they don't necessarily let distributors (like us!) know that they've changed something about the product or where it is manufactured.

If you receive a product that PlumbingSupply.com® says is "Made in the USA" and the product states it was manufactured elsewhere, please contact us. We will happily replace or refund your purchase to your satisfaction.

return to top ↑

Copyright© 1995-2020 PlumbingSupply.com.
All Rights Reserved.