Lakos #AP-75-MBV AccuPurge Automatic Purge For SandMaster

- +

$901.97

Designed specifically for Lakos SandMaster SMP and H2O sand separators, the #AP-75-MBV AccuPurge enables efficient and automated purging of separated solids.
Enhances system performance by regularly clearing out sand and debris, preventing buildup and maintaining consistent filtration.
Easy-to-program automatic valve.
Nickel-plated brass body with stainless steel ball.
110v or 220v operation (same unit).
Valve may be installed in any position at the purge connection.
LED display for programming and "valve open" indicator.
Purge duration can be set at 20 seconds (recommended minimum) or as long as 5 minutes (Note: longer purge duration is only needed when the purge line is greater than 2-3 feet from the valve to open discharge.
Purge frequency can be set for every 4 minutes or up to every 24 hours.
Manual override.
Maximum working pressure: 150 psi.
Battery-powered backup provides "fail-safe" closure of the valve if power should be interrupted while the valve is open.
Requires four AA batteries (not included).
Shaded installation recommended, avoid direct sprinkler spray and submergence in water.
3-prong grounded plug for easy installation.
View typical installation diagram.