Skip to main content
The Premier Online Plumbing Supplier Since 1995

Replacement Parts For Delta Bar Faucets

PlumbingSupply.com® has the best selection of genuine Delta repair parts available on the Internet today.


Parts for Two Handle Bar Faucet - Model #2170

Delta bar faucets model 2170

Item # Part # Description Price & Quantity
#1 RP6199 Spout Assembly - Chrome Discontinued
#2 RP6100 2.2 GPM Aerator - Chrome $14.96 Enter a quantity and
#3 RP6365 O-Ring $4.17 Enter a quantity and
#4 RP21963 Bushing $4.95 Enter a quantity and
#5 RP6197 Spout Bonnet - Chrome Discontinued
#6 RP6060 Bonnet Nuts (x2) $11.63 Enter a quantity and
#7 RP1740 Stem Unit Assembly (x1) $7.58
RP1740-PR Stem Unit Assembly (x2) $14.00 Enter a quantity and
#8 RP4993
Seats & Springs (2 Seats & 2 Springs) $5.61 Enter a quantity and
#9 RP6193 Escutcheon - Chrome Discontinued
#10 RP6195 Undercover Plate Discontinued
#11 RP6183 Locknuts (x2) $5.07 Enter a quantity and
#12 RP5861 Coupling Nuts (x2) $8.74 Enter a quantity and
#13 H21 Clear Knob Handles with Screws and Buttons (x2)
#14 H22 Lever Handle Bases with Set Screws and Spindles (x2) Enter a quantity and
#15 A22 Metal Lever Handle Accents (Pair)
#16 H24 Lever Handle Bases with Set Screws and Spindles (x2) Enter a quantity and
#17 A24 Metal Lever Handle Accents (x2)
#18 H25 Metal Lever Handles with Accents (x2) Enter a quantity and
#19 H26 Metal Cross Handles - Chrome Not Offered
#20 H27PB Porcelain Cross Handles - Polished Brass (x2) Discontinued Enter a quantity and
#21 H28 Blade Handles with Buttons and Screws - Chrome (x2) $18.95 Enter a quantity and
Not Shown 963-01 Silicone Lubricant for O-Rings and Stems - FDA approved - ¼ oz. $2.52 Enter a quantity and
Please note: Due to state mandated low-flow regulations, these aerators cannot be shipped to California or Colorado.

Related Items & Information



Frequently Asked Questions

Q. "Are there any helpful hints for changing balls/cartridges/seals?"
A. When changing the ball/cartridge and/or seal it is recommended that with an assistant, you hold a cup or towel over the open valve, turn on the water to flush out the lines, then install the new part. This may help to extend the life of the parts.

Q. "I switched my round handles to lever, but one turns on and off in the wrong direction. What can I do to fix it?"
A. You will need to remove the cartridge from that side and turn it 180° then put it back in.

Q. "How do I get the seal out after I remove the cartridge/ball?"
A. Push a pen or pencil into the seal then pull it out.

Q. "I put in a new cartridge but now it turns on and off opposite of before. Did I purchase the wrong cartridge?"
A. No, you will need to remove the cartridge and turn it 180° then put it back in.


return to top ↑

Copyright© 1995-2018 PlumbingSupply.com.
All Rights Reserved.