Walrus #TQ2200 Water Pump - 3HP - 3phase - 230V

- +

$1343.36

The TQ2200 comes complete with pump, motor, pressure tank, and electronic controller all in one unit. The electronic controller ensures the pump starts automatically when water is utilized, providing constant pressure, and operates continuously until water is no longer required and is turned off.
Constructed from corrosion resistant stainless steel and glass filled noryl materials.
Operates quietly in a compact housing.
Suitable for use in gravity flow storage tanks, well systems, home additions, and other low water pressure applications.
The TQ pumps have an automatic shut off if they run dry for 2 minutes. The pump will shut off for ten minutes and then attempt to restart. If three attempts are made and all three attempts fail again, due to dry run, the pump will rest for one hour and then attempt to restart. This protection sequence will continue until the water supply is back to normal.
Powerful 3 HP motor ensures consistent water flow for demanding applications, making it ideal for industrial and commercial use.
Operates on 3-phase 230V power, offering energy efficiency and reduced electrical load across phases.
This pump has an anti-cycling feature to help prevent the pump from continuous starting and stopping if you have a dripping faucet or minor leak in your system.
The TQ2200 pump is able to pump water from depths of 25 feet or less. However, on installations with suction lifts higher than 3 feet a good quality foot valve must be installed and the piping filled with water.
Engineered by Walrus, a trusted name in pump technology, known for durable and high-performing systems.
Suitable for water supply pressure boosting in residential, commercial and light industrial applications where low or inadequate water pressure exists.
Robust construction supports long service life and reliable operation in tough environments.
Designed for smooth and quiet performance, minimizing vibration and operational noise.
Indoor use only.
Ambient temperature: Max. +104�F.
Liquid temperature: +39�F up to +104�F.
Relative humidity: Max. 85%.
System pressure not to exceed MAXIMUM 120 PSI (inlet supply pressure + maximum discharge pressure = system pressure).
The incoming water pressure must be lower than the factory start pressure setting for these pumps to function correctly. If your incoming water pressure is higher than the factory start pressure setting then choose a larger pump that has a factory start pressure setting higher than your incoming water pressure.
The internal flow switch will turn the pump on when it detects water flow of 0.75 GPM or greater.
Uses 9.5 amps.

Water Pressure Booster Pumps

Walrus #TQ2200 Water Pump - 3HP - 3phase - 230V

Related Pages