Sharkbite® pipe repair fittings by Cash Acme® use a push-fit connection system that produces a faster, easier way to join copper, CPVC, or PEX Pipe in any combination. Disassembly of the connections are just as fast using the simple disconnect tool known as a De mount Clip. Even after being assembled, the fittings can be rotated for easier installation in tight, hard to reach spaces.

The Shark Bite Push-Fit Connection System

Jump to Sharkbite® straight couplings - to Sharkbite® slip couplings - to Sharkbite® check valves to Sharkbite® straight connectors - to Sharkbite® 90 degree elbows - to Sharkbite® reducers

All Sharkbite® Pipe Repair Fittings Feature Easy on - Easy off instant push-fit connections Up to 200 psi & 200°F certification Solid body DZR Brass composition Certified to ANSI/NSF-61 for potable and hydronic heating water distribution Approved to be used underground and behind walls without access panels No soldering, clamps, unions, or glue required - increasing the ease of use while decreasing the time and effort to install, saving on labor costs! Reusable - fittings can be removed with the quick release de mount clip or tong Fits OD controlled copper, CPVC, or PEX pipe • PEX pipe - (ASTM F876, CSA B137.5) • Copper - (ASTM B 88) • CPVC - (ASTM D 2846, CSA B137.6)

The Sharkbite^® Pipe Repair Kit For Contractors

This handy carrying case is included with the contractor kit!	Includes 2 Each	Includes 1 Each
	1/2" straight coupling	1/2" tee
	3/4" straight coupling	3/4" tee
	3/4" reduced coupling	1/2" end stop
	1/2" female connector	3/4" end stop
	3/4" female connector	1/2" de mount clip
	1/2" male connector	3/4" de mount clip
	3/4" male connector	1/2" disconnect tongs
	1/2" elbow	3/4" disconnect tongs
	3/4" elbow	depth gauge/de burr tool

Description	Price & Quantity
Sharkbite® Pipe Repair Contractors Kit	$289.93

- Or -

The Sharkbite^® Straight Coupling (with stop)

This Straight Coupling Features: Easy, Quick Push-fit connection of CTS copper Certified for potable and hydronic heating water distribution

Description	Price & Quantity
1/2" Sharkbite® straight coupling	$6.59
3/4" Sharkbite® straight coupling	$7.49
1" Sharkbite® straight coupling	$14.99

- Or -

The Sharkbite^® Slip Coupling (no-stop style)
Note: Slip coupling should only be used on copper

This Slip Coupling Features: Easy, Quick Push-fit connection of CTS copper Certified for potable and hydronic heating water distribution For use when pipe movement is restricted When using these fittings it is necessary to mark both pieces of the pipe, 1" in from the end to ensure that enough of the pipe remains in the fitting to make a secure leak free connection Requires the use of a de mount clip or disconnect tong

Description	Price & Quantity
1/2" Sharkbite® slip coupling	$12.98
3/4" Sharkbite® slip coupling	$15.98
1" Sharkbite® slip coupling	$19.98

- Or -

The Sharkbite^® Reducing Coupling

This Reducing Coupling Features: Easy, Quick Push-fit connection of CTS copper Conveniently reduces pipe connections while keeping the easy on/off instant push-fit system Certified for potable and hydronic heating water distribution For use when pipe movement is restricted When using these fittings it is necessary to mark both pieces of the pipe, 1" in from the end to ensure that enough of the pipe remains in the fitting to make a secure leak free connection

Description	Price & Quantity
3/4" Sharkbite® x 1/2" Sharkbite® reducing coupling	$7.99
1" Sharkbite® x 3/4" Sharkbite® reducing coupling	$19.95

- Or -

Sharkbite^® Fitting Reducers

This Fitting Reducer Features: Allows the easy reduction of 1" Sharkbite® fittings to 1/2" or 3/4" Sharkbite® fittings Configure 1" Tee's, Couplings and 90° elbow's to your unique application

Product	Description	Price & Quantity
	1/2" Sharkbite® x 1-1/8" O.D. reducer - Reduces 1" Sharkbite® to 1/2" Sharkbite®	$11.79
	3/4" Sharkbite® x 1-1/8" O.D. reducer - Reduces 1" Sharkbite® to 3/4" Sharkbite®	$12.29

- Or -

Sharkbite^® Reducers

Product	Description	Price & Quantity
	1/2" Sharkbite® x 3/4" Mipt reducer	$5.98
	1" Sharkbite® 3/4" Mipt reducer	$11.49
	1/2" Sharkbite® x 3/4" Fipt reducer	$5.95

- Or -

The Sharkbite^® Check Valve

This Check Valve Features: 1 Way flow control Easy, Quick Push-fit connection of CTS copper Certified for potable and hydronic heating water distribution For use when pipe movement is restricted To ensure proper depth try the convenient Sharkbite® depth and de-burrowing tool

Description	Price & Quantity
1/2" Sharkbite® Check Valve	$18.95
3/4" Sharkbite® Check Valve	$22.96

- Or -

The Sharkbite^® Ball Valves

This Ball Valve Features: Forged brass construction Sharkbite® connections Certified for potable and hydronic heating water distribution For use when pipe movement is restricted To ensure proper depth try the convenient Sharkbite® depth and de-burrowing tool

Description	Price & Quantity
1/2" Sharkbite® x 1/2" Sharkbite Ball Valve	$24.95
3/4" Sharkbite® x 1/2" Sharkbite Ball Valve	$29.95

- Or -

Sharkbite^® Female & Male Straight Connectors

Type	Description	Price & Quantity
Female NPT	1/2" Sharkbite® x 1/2" female NPT straight connector	$4.89
	3/4" Sharkbite® x 3/4" female NPT straight connector	$5.49
	1" Sharkbite® x 1" female NPT straight connector	$11.39
Male NPT	1/2" Sharkbite® x 1/2" male NPT straight connector	$4.69
	3/4" Sharkbite® x 3/4" male NPT straight connector	$5.29
	1" Sharkbite® x 1" male NPT straight connector	$11.49

- Or -

Sharkbite^® 90° Elbows

Product	Description	Price & Quantity
Sharkbite® 90° elbow	1/2" Sharkbite® 90° elbow	$6.79
	3/4" Sharkbite® 90° elbow	$8.19
	1" Sharkbite® 90° elbow	$16.29
90° reducing elbow	3/4" Sharkbite® x 1/2" Sharkbite® 90° reducing elbow	$9.49
	1/2" Sharkbite® x 1/2" Mipt 90° elbow	$6.89
	1/2" Sharkbite® x 1/2" Fipt 90° elbow	$6.99

- Or -

Sharkbite^® 90° Drop & Hy Ear Elbows

Product	Description	Price & Quantity
Sharkbite® 90° drop ear elbow	1/2" Sharkbite® x 1/2" Sharkbite® 90° drop ear elbow - Provides rigid 90° connections with the convenience of the Sharkbite® quick connect/disconnect system	$12.99
Sharkbite® x Fipt 90° drop ear elbow	1/2" Sharkbite® x 1/2" Fipt 90° drop ear elbow - Provides rigid 90-degree connections and the ability to secure tubing	$7.19
Sharkbite® x Fipt 90° hy ear elbow	1/2" Sharkbite® x 1/2" Fipt 90° hy ear elbow - Rigid 90° connection with the ability to securely anchor your pipe	$7.29

- Or -

Sharkbite^® Tee's

Product	Description	Price & Quantity
	1/2" Sharkbite® Tee	$9.29
	3/4" Sharkbite® Tee	$10.99
	1" Sharkbite® Tee	$18.69
	3/4" x 3/4" x 1/2" Sharkbite® Reducing Tee	$12.29
	3/4" x 1/2" x 3/4" Sharkbite® Reducing Tee	$12.99
	3/4" x 1/2" x 1/2" Sharkbite® Reducing Tee	$11.99
	1" x 1" x 3/4" Sharkbite® Reducing Tee	$21.83

- Or -

Sharkbite^® Endstops (caps)

Product	Description	Price & Quantity
	1/2" Sharkbite® End Stop	$5.39
	3/4" Sharkbite® End Stop	$6.69
	1" Sharkbite® End Stop	$14.19

- Or -

Sharkbite^® De mount (Disconnect) Clips & Tongs

Product	Description	Price & Quantity
	1/2" Sharkbite® De mount (Disconnect) Clip	$1.99
	3/4" Sharkbite® De mount (Disconnect) Clip	$1.99
	1" Sharkbite® De mount (Disconnect) Clip	$2.29
	1/2" Sharkbite® Tongs	$29.95
	3/4" Sharkbite® Tongs	$29.95
	1" Sharkbite® Tongs	$29.95

- Or -

Removing your pipe from a Sharkbite® fitting is simple with these tongs

Step #1: Grip the Sharkbite® fitting with the tongs, squeeze the Sharkbite® fitting depressing the release ring

Step #2: Rotate the pipe 90°, rotate again and simultaneously remove the pipe from the fitting

Sharkbite^® Depth & De-Burr Tool
De-Burr & mark proper pipe depth for 1/2", 3/4", and 1" copper pipe

Step 1: Insert copper pipe into depth tool & rotate to de burr	Step 2: Mark copper pipe - this allows you to see how deep to insert the pipe into your Sharkbite® fitting	Step 3: Your neatly de-burred copper pipe can now easily be inserted into your Sharkbite® fitting smoothly without worrying about snagging o-rings
Sharkbite® depth & de burr tool for 1/2", 3/4", and 1" copper pipe = $27.95

- Or -

Professional Plumber's Tubing Cutters

Quick Release Tubing Cutters
Quick release tubing cutters for metal • Includes wheel
Part#	O.D. Capacity	Price & Quantity
TC1Q	1/8" - 1 5/6"	$55.53

- Or -

Soft Pipe Tubing Cutter: For cutting soft vinyl tubing and hose PVC handle Part # Description Price & Quantity 4682 Complete $8.99 4682-B Blade only $7.79

Order 100 or more for greater savings!

- Or -