Industrial Strength Pipe Repair Products

Pipe Repair Kit

This pipe repair kit features: Permanently repair most pipes/fittings or hose in minutes Applies like tape, sets like steel Works on pipe of nearly any material, including copper, steel, plastic, cast iron, rubber Includes everything you need but water - No tools needed! Kit includes: foil packed resin tape protective gloves application lubricant installation instructions Will withstand 180 psi and 600ºF Cures rock hard in 40 minutes Made in USA

For best seal: tape has to extend at least 1" past the damage/leak/crack.
Make sure the seal is tight and there are no bubbles between layers.

- Or -

Two Part Epoxy Putty Tube - 4 oz

Convenient multi-purpose sealing, patching, mending Mixes in the hand and hardens in minutes May be drilled, tapped, filed, sanded Steel filled material Non-toxic material contains no solvents and will not shrink Made in USA

- Or -

Steel Reinforced Epoxy - 1.33 oz
Shown unmixed	Allows you to make repairs that are impervious to water, oils, chemicals, solvents, and acids Exceptional adhesion to a wide variety of materials, including metals and plastics Hand workable - no tools needed! Fully cures in 1 hour, but steel-hard within minutes of mixing Once cured, can be drilled, tapped, sanded, filed, machined, primed, and painted Steel reinforced material Will not rust or oxide Safe for drinking water contact Heat resistant to 392°F Made in USA
Example of white epoxy in use (currently available in copper color only)

- Or -

Heavy Duty Industrial Pipe Repair Kit Water Activated Fiberglass Wrap For Fast Emergency Repairs

For best seal: tape has to extend at least 2" past the damage/leak/crack. Make sure the seal is tight and there are no bubbles between layers.

These pipe repair kits feature: A permanent repair for cracked pipes Fast and economical solution compared to pipe replacement Ideal for municipalities, industrial parks, water and sewer plants, pump stations, marine and chemical/petroleum plants Designed specifically to repair pipe diameters from 8" to 50" Repairs up to 1/4" wide x 4" long cracks in 8" to 50" diameter piping Repairs up to 1" long cracks in 3" - 6" diameter piping Works on most pipe materials including cast iron, ductile iron, copper, plastic, PVC, asbestos cement, cement, lead or clay Impervious to water, oils, chemicals, solvents, and acids NSF approved safe for drinking water system repairs Cures in 60-90 minutes at 55° - 75° F. Lower temperatures and low humidity will slow the cure time Higher temperatures and high humidity will accelerate the cure time Manufacturer recommends application of this product above freezing temperatures but not higher than 99°F. Can be sanded and painted after curing has completed Heat resistant to 425°F Works on wet or damp surfaces Works under water, fresh or salt Conforms to a standard water main pressure test Made in the USA Each kit includes: Resin impregnated water activated fiberglass tape Epoxy putty to enhance repairs One pair of protective gloves Complete installation instructions

- Or -

Note: the above products cannot fix everything (all applications in all situations).
In other words: sometimes the above products are not the right products for all jobs and
we do not guarantee that either of these products will/can fix your leak.

to PVC compression emergency fittings