If you're looking for pipe clamps for any job, we have the solution here at PlumbingSupply.com! We don't think you'll find a better selection of
hangers, clamps or
j-hooks anywhere on the Internet! Looking for hose clamps? We have a fantastic selection of marine grade, best-quality,
hose clamps, too!
We sell in bulk, no need to buy packaging or kits.
Buy only as many as you need.
Order 50 - 99 of the same size/type for additional savings
Order 100 or more of the same size/type for even greater savings!
click for larger image
Order 10 - 49 of the same size/type for additional savings
Order 50 or more of the same size/type for even greater savings!
click for larger image
Order 10 - 49 of the same size/type for additional savings
Order 50 or more of the same size/type for even greater savings!
Order 50 - 99 of the same size/type for additional savings
Order 100 or more of the same size/type for even greater savings!
Order 50 - 99 of the same size/type for additional savings
Order 100 or more of the same size/type for even greater savings!
 |
Features:
- Preloaded ring-shank nail assures a permanent hold
- Provides 1/4" standoff
- Snaps onto tube for "hands free" installation
- For use with any CTS pipe (copper, PEX, CPBV, PB)
|
Order 50 - 99 of the same size/type for additional savings
Order 100 or more of the same size/type for even greater savings!
 |
Features:
- Preloaded nail
- Absorbs vibration
- Tube is not damaged if nail is overdriven
- Install in alternating directions to ensure secure piping
- For use with any CTS pipe (copper, PEX, CPVC, PB)
- For IPS piping (PVC and iron pipe) use next larger size Tube Talon
|
Order 50 - 99 of the same size/type for additional savings
Order 100 or more of the same size/type for even greater savings!
| Touchdown Clamp |
 |
|
 |
This Touchdown Clamp features:
- Clamps any pipe, conduit or wire from 3/8" to 1-1/8"
- Strong and U.V. resistant Nylon 66
- Variable tension slots for soft or firm clamping installations.
- Perfect for jobs where many pipe and tube sizes are used
|
|
|
| Touchdown II -- Large Universal Pipe Clamp |
 |
This large universal pipe clamp features:
- Clamps 1/2" - 2" CTS tubing (copper or plastic) and 3/8" - 2" Sch. 40 pipe (steel or plastic)
- Releasable locking mechanism
- Variable clamping tension allows for expansion and contraction
- Use with AC condenser line sets
- Provides 5/8" stand-off
- Touchdown II with noise absorbing inserts clamps any pipe conduit or wire up to 1-1/2" OD
|
|
|
| Grid Iron -- Universal Bracketing System |
 |
 |
 |
 |
This universal bracketing system features:
- PVC material's tensile strength exceeds 7,000 PSI
- All four sides have strap slots and clamp holes
- 6" and 8" centers possible on all four sides
- Multiple pipes may be secured using Touchdown
clamps or stainless steel bands
- Fits inside a 2" x 4" wall with a 2" pipe
- 3/8" holes are great for all-thread rod when used as a trapeze
- Perfect for mechanical chases, standing off pipe, or walls
- Overall length is approximately 10 1/2" inches
|
|
|
Convert from Outside Diameter to "Nominal" size:
| Outside Diameter of pipe |
1/4" |
3/8" |
1/2" |
5/8" |
3/4" |
7/8" |
1 1/8" |
1 3/8" |
1 5/8" |
2 1/8" |
| Nominal Pipe Size |
1/8" |
1/4" |
3/8" |
1/2" |
5/8" |
3/4" |
1" |
1 1/4" |
1 1/2" |
2" |
In the plumbing trade it is most common to use "nominal" sizes for larger copper pipes, and
it is very common to make sizing mistakes when ordering, so please pay extra attention on sizing.
