Jet Cleaning Equipment

The JM-1450 has great cleaning power in a compact design. You can take this jet into some really tight spaces. And if you want to put it into a car trunk, you can take off the reel in seconds and load the machine in two pieces. The telescoping handle on the JM-1450 makes it easy to roll the machine to and from the job, and then slides out of your way when you're on the job. A low center of gravity keeps the JM-1450 solidly in place while you work. The JM-1450 is powered by a 1-1/2 hp (13 amp) sealed motor with an in-line Ground Fault Circuit Interrupter. The dual capacitor motor is totally enclosed, so water won't harm it or pose a shock hazard. A 1500 psi, 1.7 GPM triplex pump is equipped with Vibra-pulse^® to work the hose around tight bends in small lines. This unique feature allows the flow rate to remain the same whether Vibra-pulse^® is on or off. Safety features include a thermal relief valve to protect the pump from heat damage, as well as a back-flow check valve and inlet filter.

• Includes 1-1/2 HP motor with GFI (115 volt/13 amp)
• 1500 psi/1.7 gpm triplex pump with Vibra-pulse^®
• 150 ft. capacity hose reel
• 2 semi-pneumatic tires
• Convenient power switch location for easy operation
• Rounded handle for comfortable use
• Pressure gauge and rubber gloves

The JM-2900 is an economical alternative to the JM-3000. It's lighter and more maneuverable, yet maintains the same pressure and flow rate as the JM-3000. It's driven by an 389cc engine connected directly to a 3000 psi, 4 GPM triplex pump with the same bypass as the larger units. A 200 ft. capacity hose reel with drag brake, reel lock and brass swivel is mounted on a heavy duty frame with four pneumatic tires making it simple to move from job to job. Safety features include a thermal relief valve, along with a back-flow check valve and inlet filter.

• 389cc engine
• 3000 psi/4 gpm triplex pump with Vibra-pulse^®
• 200 ft. capacity hose reel
• 2 pneumatic tires
• Pressure gauge and rubber gloves

The JM-3000 is great for large lines and long runs, as well as small lines. And it's much more powerful than smaller jets. A 3000 psi, 4 GPM triplex pump with Vibra-pulse^® on demand drives the hose easily around tight bends and down long runs. The pump is powered by a reliable 389cc engine attached to a 2 to 1 gear reducer to extend the life of the pump. The frame has been specially designed for optimum maneuverability and the entire machine can be tipped back into it's rear wheels, making it easy to move into place; in addition the engine is located in the rear of the machine, providing balance.

• 389cc Electric start engine
• 3000 psi/4 gpm triplex pump with Vibra-pulse^®
• 300 ft. capacity hose reel
• 4 pneumatic tires
• Spray wand with trigger
• Pressure gauge, rubber gloves and tool box

The JM-3055 has the power to clear your most stubborn grease stoppages. Its 3000 psi, 5.5 GPM triplex pump has plenty of thrust to pull the hose down long runs, enough pressure to cut through grease stoppages, and the necessary flow to flush them away. In fact, the JM-3055 has the highest flow rate available without requiring a holding tank. It's driven by a 480cc engine with electric start. The pump features Vibra-pulse^® on demand, for getting the hose around tight bends. Standard safety features include a thermal relief valve to protect the pump from heat damage, along with a back-flow check valve and inlet filter. This unit includes a removable 300 ft. capacity hose reel with drag brake, reel lock, and brass swivel that is mounted on a heavy duty frame with four pneumatic tires. The frame is designed for to maximize maneuverability. One great feature is that the entire machine can be tipped back on the rear wheels, making it easy to maneuver into place; in addition the engine is located in the rear of the machine, providing balance. A wheel brake engages with the touch of your foot to keep the machine solidly positioned on the job or on your truck. Complete with tool box, chemical injector, and spray wand with trigger.

• 480cc engine with Electric Start (battery sold separately)
• 3000 psi/5.5 gpm triplex pump with Vibra-pulse^®
• 300 ft. capacity hose reel
• 4 pneumatic tires
• Spray wand with trigger
• Pressure gauge, rubber gloves and tool box
• Please note that a battery is required for these units to start. Batteries can be purchased at your local hardware store

The JM-3080 gives you the increased cleaning power of 8 gallons of flow per minute without risking pump damage if your water supply can't match the pump demand. A 12 gallon buffer tank mounted on the frame gives you the safety margin you need when using a high-flow water jet to clear larger and more difficult lines. The tank extends the operating time as well. A 614cc engine with electric start drives a 3000 psi, 8 gpm pump through a 2 to 1 gear reducer to extend pump life. The pump features Vibra-pulse^® on demand, to help propel the hose on long runs and around tight bends.

• 614cc engine with Electric Start (battery sold separately) and low oil shut off
• 3000 psi/8 gpm pump with Vibra-pulse^®
• 300 ft. capacity, removable hose reel
• 12 gallon holding tank and spray wand
• 4 pneumatic tires
• Rear engine placement provides better balance
• Please note that a battery is required for these units to start. Batteries can be purchased at your local hardware store

Tough high pressure jetting hose comes in a variety of lengths and diameters. Use 1/2" ID hose for main lines and long runs 4" through 12" in diameter at distances of up to 400 ft. Use the 3/8" ID hose for clean outs, 4" through 8" floor drains, and septic lines at distances up to 300 ft. With the 1/4" ID hose, you can clear 2" through 4" lines up to 200 ft. away.