PlumbingSupply.com is pleased to offer this and other pages that provide information on plumbing products or the installation and/or care of many of the products offered on our site. If there is something you'd like to learn about and you don't find it addressed on our site, please
email us and we will answer your questions, to the best of our ability, and add that information to our site for other customers.
| Steamist SBS-101 Folding Shower Seat (Tilt-Up) Product Information |
 |
This durable, sturdy seat holds up to 250 pounds!
The tilt-up seat easily mounts to any wall and conveniently tilts up after use, requiring minimal space. It is made of select moisture-resistant IROKO wood, supported by a brass tubular frame. This frame is either plated or powder coated, and is available in chrome, white, brass, oil rubbed bronze, or satin nickel to enhance the design.
The tilt-up seat shower seat is supported with mounting brackets (included) for easy installation to a stud wall or header bar. It can be mounted a masonry, tiled, or blocked wall. The mounting brackets must be anchored to a solid structure to assure safety and security. Complete installation instructions and component kit are included with the folding shower seat.
|
| click here to purchase this folding shower seat |
|
INSTALLATION GUIDE: |
 |
COMPONENTS:
- 1 - Seat Assembly
- 6 - Flat Head Screws
- 6 - Plastic Anchors
- 2 - Wall Brackets
- 2 - Bracket Covers
- 2 - Mounting Pins
- 4 - Pin Caps
|
|
 |
STUD WALL: MOUNTING (WOOD)
- 16" on center (use template provided)
- Use (4) flat head screws provided for this installation
- Screws should penetrate into the studs a minimum of 1-1/2"
- A 1/4" dia masonry tool bit should be used to drill thru tile and wonder board for screw clearance hole
|
|
 |
HEADER:
- 16" on center (use template provided)
- Header to be 2" x 6" or equivalent and must be an adequate anchor base, secured into studs
- Use (6) flat head screws provided for this installation
- Screws should penetrate into the header a minimum of 1-1/2"
- A 1/4" dia masonry tool bit should be used to drill thru tile and wonder board for screw clearance hole
|
|
 |
MOUNTING: (MASONRY, BRICK OR BLOCK WALL)
- 16" on center (use template provided)
- Install (6) plastic anchors provided for this installation
- A 5/16" dia masonry tool bit should be used for this application
|
| click here to purchase a folding shower seat |
 |
With any brand or model of shower seat:
Always make sure that mounting bolts, etc are tight and secure.
If it is wobbling at all do not use it until that is fixed.
Be sure to mount the seat in something substantial
and not just sheetrock without backing.
