Halsey-Taylor is a leader in the drinking fountain/cooler industry. Whether you need a single or dual level fountain, with or without sensor activation, let PlumbingSupply.com be your source for refrigerated drinking water fountains.
| Voyager Series Water Coolers |
| |
 |
 |
| HTV8-Q |
HTV8EE-Q (auto-sensing) |
| Specifications (for the below drinking water coolers) |
| General - Self-contained, ADA Compliant, electric refrigerated wall-mounted water cooler with softly rounded corners and edges, designed to be easily accessible to physically challenged individuals. |
| Easy-To-Install - The large opening in the back makes most retrofit applications easier. |
| Easy to Service - Routine service and maintenance can be easily performed through the front of the unit by simply removing two panels. |
| Impact Resistant - Voyager's durable construction makes it an ideal water cooler for schools, malls, stadiums, office buildings and other high-traffic areas. |
| Cabinet - Molded two-tone gray space-age polymer with softly rounded edges. Resistant to impact, wear, corrosion, heat and sunlight. |
| Cooler Top - Non-corrosive stainless steel cooler top, number 300 series with satin finish resists stains and corrosion and is easy to maintain. Anti-splash design reduces splatter. Contour design and integral strainer insure proper drainage. |
| Bubbler - Exclusive one-piece, chrome-plated two-stream mound-building bubbler with non-removable anti-squirt feature and integral hood insures a satisfying drink of water. |
| Push Bar Actuation Mechanism - Self-closing light-touch push bars require minimal pressure to activate. |
| Automatic Actuation Mechanism (HTV8EE-Q & HTV8BLEE-Q) - Features infra-red light beam
emitting sensor and a solenoid valve. Upon interruption of the light beam, the sensor
actuates the solenoid valve to flow water. User does not have to touch the water cooler to
obtain a drink of water. The water flow is automatically shut-off after 30 seconds or
earlier if the user leaves the sensing range. Supplied with a built-in time delay to avoid
nuisance actuation from passers-by. |
| Automatic Stream Height Regulator - Self-closing assembly is located inside unit to
prevent tampering. Unit resists corrosion and liming. A constant stream height is automatically
maintained under line pressures that vary from 20 to 105 psi. |
| Solenoid Valve / Inlet Strainer - Self-closing solenoid valve includes easily
cleaned in-line strainer that screens particles of 140 microns or larger before they enter the waterway. |
| Temperature Control - Positive sensing thermostat for controlling
temperature of storage tank water. Factory set at 50° F Adjustable ± 5° F. |
| Storage Tank - Non-pressurized stainless steel evaporator/storage tank for long life.
Waterways are classified by Underwriters Laboratories, Inc. in accordance with
ANSI/NSF 61, Section 9, far exceeding the requirements of the Safe Drinking Water Act. |
| Refrigeration System - Hermetically sealed, positive start compressor with lifetime lubrication and built-in overload protection, efficient capillary sizing, large capacity dryer-strainer, and fan cooled copper/aluminum condenser with self lubricated bearing. System uses R134A refrigerant. |
Items that ship by truck are non-returnable.
Some products may have a lead-time to ship of 2-4 weeks.
NOTE: Images shown on this page may differ from actual product appearance, especially in finish.
Bi-Level Water Coolers
by Halsey Taylor
Same specifications as shown above, except these are dual level water coolers
 |
 |
| HTV8BL-Q-TTG |
HTV8BLEE-Q-TTG (auto-sensing) |
* Requires cane touch apron
Items that ship by truck are non-returnable.
Some products may have a lead-time to ship of 2-4 weeks.
Items that ship by truck are non-returnable.
Some products may have a lead-time to ship of 2-4 weeks.
NOTE: Images shown on this page may differ from actual product appearance, especially in finish.
California Proposition 65, "The Safe Drinking Water and Toxic Enforcement Act of 1986" is the most stringent law (that we know of) of its kind at either the state or federal level. The federal standard for lead in drinking water is 11 ppb (parts per billion) while prop 65 (Calif) mandates a level of .05ppb. The Center for Environmental Health recommends that consumers run water for 10 seconds before drinking water with the highest lead levels (from pre "Act" faucets).
Additionally, with the passage of California Assembly Bill 1953 and Vermont Assembly Bill VT S.152, "lead free" is defined as to mean not more than a weighted average of 0.25% lead content in pipe and fittings. What this means for you is the lead content in faucet spouts and fittings will not be legally allowed to have more than one-fourth of one percent of lead, so water traveling through compliant faucets and fixtures will be essentially "lead free".
|
