Grinder packages (aka, sewage ejection packages) and grinder pumps, manufactured by Liberty Pump, are some of the finest on the market today. The pre-assembled components of the grinder packages - internal brackets, floats, guide-rail base, grinder pump and discharge piping - saves hours of labor at the job site, which saves you money and gives you extra time to tend to other tasks.
Pre-Assembled Sewage Systems
& Grinder Pumps by Liberty Pumps
| 2448LSG Simplex Grinder Package |
 |
This grinder package features:
- Integral ball check valve
- 24" x 48" fiberglass basin with anti-flotation collar
- 15 Amp, 2 hp. grinder pump with 25' cable length
- 4" caulking-type inlet hub
- 1¼" female NPT discharge
- Pre-mounted floats for pump control & alarm and JB230 wiring box
- Factory pre-assembled GR20 guide rail system
- Includes ALM-2W 115V indoor/outdoor alarm
- Stainless steel chain for pump lift-out
- Factory pre-assembled
- Click to see performance curve
- Click for dimensions
|
|
|
| 2484LSG Simplex Grinder Package |
 |
This grinder package features:
- Integral ball check valve
- 24" x 84" fiberglass basin with anti-flotation collar
- 15 Amp, 2 hp. grinder pump with 25' cable length
- 4" caulking-type inlet hub
- 1¼" female NPT discharge
- Pre-mounted floats for pump control & alarm
- Factory pre-assembled GR20 guide rail system
- Includes SX24=3 control panel w/alarm
- Stainless steel chain for pump lift-out
- Factory pre-assembled
- Click to see performance curve
- Click for dimensions
|
|
|
These Sewage Grinder Products are normally in stock at the manufacturer.
If time is of the essence, please contact us prior to ordering.
| 2472LSG-Series Simplex Grinder Package |
 |
These grinder packages features:
- Factory assembled simplex grinder package with 24" X 72" fiberglass basin and Omnivore Grinder Pump.
- Pump features Franklin Electric 2 hp heavy-duty oil filled and thermally protected motor, 208-230 Volt, 15 Amps, 1 Phase. 1-1/4" discharge. GR20 Guide Rail Assembly.
- Omnivore Grinder Pump with new V-Slice Cutter Technology: Recessed cutter bolt eliminates wadding and exclusion clean out slots clears debris from under the cutter. Provides superior cutting with improved shredding performance over radial cutters. V-pattern cutter provides up to 108 alternate cuts per revolution.
- SXH24=3 panel w/built in alarm
- NEMA 4X junction box for electrical connections included
- Stainless steel chain for pump lift-out included
- Two years manufacturer's limited warranty
- Click to see performance curve
- Click for dimensions
|
|
|
| LSG200-Series Omnivore™ Grinder Pumps |
 |
This grinder pump features:
- Automatic model - on at 15"; off at 8" (adjustable)
- Available in Manual or Automatic
- 208-230V, 1 phase, 15 Amps, 2 hp. - oil filled - powder coated
- New V-Slice™ cutter technology - improves shredding performance
- One-piece, uni-body casting
- 316 stainless steel rotor shaft and impeller
- 25' power cord with quick-disconnect
- Horizontal 1¼ female NPT discharge
- Clog-free volute design
- Maximum vertical lift (Shut-off) at 110'
- Piggy back plug with wide angle float on Automatic model
- Click to see performance curve
- Click for dimensions
- NOTE: GR20 guide rail base option sold separately below
|
|
|
| LSG202-RE Retro-Fit System for E/One® Grinder Packages |
 |
This grinder package features:
- Liberty's 2 hp Omnivore Grinder Pump
- Assembled and ready to drop-in-place.
- Includes floats, piping, and replacement cover.
- Heavy-duty cast iron anti-siphon check valve.
- Maximum vertical lift (Shut-off) at 110'
- Weatherproof junction box.
- Click to see performance curve
- Click for dimensions
|
|
|
| GR20 Guide Rail Base -- for use with LSG-Series pumps only |
This guide rail base features:
- Cast-iron construction
- Integrated ball check valve
- Single 1¼" guide rail design
- Auto alignment feature (on LSG-Series pumps only)
- Upper rail support bracket
- Click for dimensions
|
 |
|
|
