PlumbingSupply.com® logo
The Leading Online Plumbing Supplier Since 1995
Product Search:

Largest Inventory - Best Service - Lowest Prices
A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Same day shipping on in-stock orders placed before 4:30pm Pacific Time M-F



Simple, straightforward and low shipping rates for these mop sinks.


Mop Sinks

Commercial/Restaurant/Industrial Mop Sinks

Proudly made in the USA

Mop sinks make daily clean up efficient, sanitary, safe (no heavy lifting) and may save money in the long run when you think of the time (and back!!) savings. PlumbingSupply.com® is your source for mop sinks and faucets from Griffin, Aero, Advance-Tabco and GSW.

Griffin Floor Mop Sink
Griffin floor mop sink This floor mop sink features:
  • Floor mounted square corner design
  • 16 gauge, type-304 stainless steel True Gauge construction means the seams and corners are as substantial as the body of the sink
  • Sink rests on a three-sided apron enclosure for great looks and ease of cleaning
  • Robust uni-body bowl construction
  • Sink compartment is 8" deep
  • 3-1/2" free-flow drain with strainer included
  • Manufacturer's lifetime warranty
  • View dimensional drawing
Floor mop sinks help to keep you from lifting heavy buckets of dirty water, which in turn makes it far easier to change out cleaning water without splashing or injury when compared with raising buckets to a leg mounted mop sink. This floor mounted mop sink is constructed with the intent to last a lifetime. Constructed of durable 16 gauge stainless steel and featuring a 1-1/2" backsplash, this mop sink is designed to connect to 2" waste piping. Easy to clean three sided apron enclosure means this can be placed against any wall, providing versatility in installation. Install under a wall mounted faucet or near a spigot for easy bucket filling!

Model Gauge Bowl Size
W x L x D
Overall Size
W x L x H
Price & Quantity
UM-220 16 20" x 20" x 8" 23" x 23" x 12" $829.03
UM-224 16 24" x 24" x 8" 27" x 27" x 12" $1036.69
UM-234 16 30" x 24" x 8" 33" x 27" x 12" $1156.59
UM-233 16 30" x 30" x 8" 33" x 33" x 12" $1379.76
UM-294 16 36" x 24" x 8" 39" x 27" x 12" $1289.78
UM-299 16 36" x 36" x 8" 39" x 39" x 12" $1679.24
T-15-VB Mop / Prep Sink Faucet - Polished Chrome $163.87

- Or -
View Button

to many more mop sink faucets

Griffin Mop Sink with Legs
Griffin mop sink with legs This mop sink with legs features:
  • Durable 16 gauge type 304 stainless steel construction designed for a lifetime of rigorous use
  • Robust uni-body bowl construction with square corners provides superior durability
  • 1-5/8" diameter stainless steel legs adjust up to 5/8" on bullet feet
  • 3-1/2" basket drain included
  • Compatible with DR series drainboards offered separately
  • Manufacturer's lifetime warranty
  • See dimensional drawing
Many health codes for restaurants require at least one utility sink (mop sink). When you need a deeper sink for cleaning, a leg mounted mop sink may be just the ticket. Over a foot deep, this type of sink is sometimes referred to as a utility sink. Useful in any janitor's closet, commercial kitchens, or even at home, this sink is constructed of durable 16 gauge stainless steel with square corners. The leg sockets are welded directly to the sink body, which provides proper load support, making this sink a superior choice. The backsplash is 6 inches tall with a 2 inch return, making it perfect for a backsplash mounted faucet with 8" centers.

Model / Description Gauge Bowl Size
W x L x D
Overall Size
W x L x H
Price & Quantity
UM-188 Mop Sink w/Legs 16 18" x 18" x 14" 21" x 21.5" x 32" $509.02
T-15-VB Mop / Prep Sink Faucet - Polished Chrome $163.87
 
Due to weight and to ensure safe delivery, these mop sinks ship by truck and have a $175 additional shipping fee.
Please select your type of address: Commercial -or- Residential

- Or -
View Button

to many more mop sink faucets




Aero Mop Sinks
Aero mop sinks
Model Shown: #3MP-2116-6
 
The clean edges, durable construction and design, as well as multiple size options make Aero sinks one of the top choices in mop sinks. Made from 16 gauge Stainless Steel, these rugged mop sinks come standard with a heavy-duty free flow drain, and are easy to install. Add a commercial grade faucet such as the T-15-VB shown below or one of our many other faucets, and you're all set!

Model No. Gauge Bowl Size
W x L x D
Overall Size
W x L x H
Price & Quantity
3MP-2028-6 16 20" x 28" x 6" 25" x 33" x 10" $929.14
3MP-2028-12 16 20" x 28" x 12" 25" x 33" x 16" $1094.40
3MP-2116-6 16 21" x 16" x 6" 24" x 19" x 10" $753.13
3MP-2116-12 16 21" x 16" x 12" 24" x 19" x 16" $1023.11
3MP-2121-6 16 21" x 21" x 6" 24" x 24" x 10" $875.93
3MP-2124-8L 16 21" x 24" x 6" 24" x 27" x 10" $672.30
3MP-2424-6 16 24" x 24" x 6" 27" x 27" x 10" $858.03
T-15-VB Mop / Prep Sink Faucet - Polished Chrome $163.87

- Or -
View Button

to many more mop sink faucets




Single Bowl Prep & Mop Sinks by GSW
GSW single bowl prep sinks
1" faucet holes at 8" centers
View the difference between prep and mop sinks
 
For those that prefer the convenience of a waist-height mop or prep sink, this single bowl model has all the right features. With the large, deep bowl and 45" overall height, this sink makes short work of all your cleaning and janitorial tasks. Made standard with stainless steel legs, cross bracing, and extra support welding, these attractive and durable sinks are designed - and built - to last.
Please note: These sinks are NOT manufactured in the USA.

Model No. Gauge Bowl Size
W x L x D
Overall Size
W x L x H
Prep Sink Mop Sink
SE18181 16 18" x 18" x 13" 21" x 21-1/2" x 45" $469.37 --
SH24241 16 24" x 24" x 13" 27" x 27" x 45" $545.31 $566.39
Due to weight and to ensure safe delivery, these sinks ship by truck and have a $175 additional shipping fee.
Please select your type of address: Commercial -or- Residential

T-15-VB Mop / Prep Sink Faucet - Polished Chrome $163.87

- Or -
View Button

to many more mop sink faucets




Advance Mop Sinks
Advance Tabco mop sinks
These mop sinks feature:
  • Floor mounted unit eliminates the need of lifting heavy containers.
  • No-drip die formed recessed V-edge on three sides with a tile edge furnished on the rear.
  • Sink bowl is seamless and is Deep Drawn designed.
  • Deep Drawn bowls have large liberal radii with a minimum of 3" and rectangular in design for increased capacity.
  • Drain is cast brass with 2" IPS male threads for easy installation to threaded coupling.
  • Heavy gauge type "304" series stainless steel.
 
These deep-drawn, heavy gauge floor mop sinks will stand up to even the busiest of environments. The standard- and deep-bowl designs will make dumping the mop bucket a much easier, quicker, and safer task, allowing you to pour out the contents without having to lift any heavy containers.
Model No. Bowl Size Overall Dim. Price & Quantity
9-OP-20 16" x 20" x 6" 21" x 25" $879.05
9-OP-28 20" x 28" x 6" 25" x 33" $1225.45
9-OP-40 16" x 20" x 12" 21" x 25" $1128.17
9-OP-48 20" x 28" x 12" 25" x 33" $1396.15
T-15-VB Mop Sink Faucet - Polished Chrome $163.87
 
Due to weight and to ensure safe delivery, these mop sinks ship by truck and have a $175 additional shipping fee.
Please select your type of address: Commercial -or- Residential

- Or -
View Button



to many more mop sink faucets - to Fisher brand service sink faucets




Quality mop sinks made from pearl gray marble chips and white Portland cement
ground smooth, grouted and sealed to resist stains.

The "Corlow" and "Hilow" Mop Sinks
Corlow mop sink
Corlow SBC-1700
Hilow mop sink HL-1800
Hilow HL-1800
These units were developed when the need arose to more efficiently drain power-driven floor maintenance equipment. Their 6" drop front styling allows the janitor to automatically dump waste water.

Made from the same high quality materials, the CORLOW and HILOW series have the stainless steel cap cast into the threshold to protect the area of greatest use. In addition, the HILOW series is also available with caps on all horizontal shoulders. If you would like to add splash guard panels to your sink, you can find them here.

View the Corlow corner mop sink dimensions
View the Hilow mop sink dimensions
Model No. Overall Dim. Weight Price & Quantity
Corlow CORNER Mop Sinks - w/ Stainless Steel Cap on Threshold
Note: Must order Speedi Drain Connectors sold separately below
SBC-1700 24" x 24" x 12" 215 $542.24
SBC-1725 32" x 32" x 12" 335 $673.19
SBC-1750 36" x 36" x 12" 415 $786.27
Hilow SQUARE Mop Sinks - w/ Stainless Steel Cap on Threshold
Note: Must order Speedi Drain Connectors sold separately below
HL-1800 24" x 24" x 12" 235 $490.29
HL-1900 32" x 32" x 12" 350 $672.35
HL-2000 36" x 36" x 12" 410 $787.76
Hilow SQUARE Mop Sinks - w/ Stainless Steel Cap on All Sides
Note: Must order Speedi Drain Connectors sold separately below
HL-1810 24" x 24" x 12" 235 $651.84
HL-1910 32" x 32" x 12" 350 $787.33
HL-2010 36" x 36" x 12" 410 $919.38
Hilow RECTANGULAR Mop Sinks
Note: Must order Speedi Drain Connectors sold separately below
HL-2100
w/ SS cap on threshold
36" x 24" x 12" 310 $618.88
HL-2110
w/ SS cap on all sides
36" x 24" x 12" 310 $723.77
Speedi Drain Connectors/Rubber Gaskets - required for these mop sinks
TC-3
For XHCI, plastic and steel pipe
3" $14.29
TC-3-NH
For SV and NHCI pipe
3" $14.32
TC-3-2
Reducer with 2" hole
3" $19.16
Faucet For Mop Sinks - Find more mop sink faucets here.
T-15-VB - Mop sink faucet - polished chrome $163.87

Due to weight and to ensure safe delivery, these mop sinks ship by truck and have a $175 additional shipping fee.
Please select your type of address: Commercial -or- Residential

- Or -
View Button



Don't forget to check out these related products:
to drop-in classroom sinks - to Sloan electronic gooseneck faucets
to laundry faucets - to drain and floor covers - to sanitary napkin/tampon dispensers




The "Cornaro" Mop Sinks
Cornaro mop sink SBC-1500
Cornaro SBC-1500
Cornaro mop sink SBC-1402
Cornaro SBC-1402
The Cornaro with its unique style adds a modern look to any of today's architectural concepts.

All the features found in our Serviceptor line are found in this model. The one-piece construction insures water tightness, and its modern style occupies less floor space. It is composed of gray marble chips and Portland cement, ground smooth, grouted, and sealed to resist stains and moisture.

The stainless steel cap is of one-piece 20-gauge stainless steel cast integral on all sides. The Cornaro with the continuous one-piece stainless steel cap is Series SBC-1500... without the stainless steel cap, SBC-1400.

The Cornaro can also be furnished with tiling flanges on two sides. It is then identified as SBC-1502, or SBC-1402.

If you would like to add splash guard panels to your sink, you can find them here.

View the Cornaro mop sink dimensions
Model No. Overall Dim. Price & Quantity
Cornaro Mop Sinks - w/ Stainless Steel Cap
Note: Must order Speedi Drain Connectors sold separately below
SBC-1500 24" x 24" x 12" $638.98
SBC-1502 - with 2 tiling flanges 24" x 24" x 12" $641.34
SBC-1525 32" x 32" x 12" $766.89
SBC-1550 36" x 36" x 12" $896.76
Cornaro Mop Sinks - LESS Stainless Steel Cap
Note: Must order Speedi Drain Connectors sold separately below
SBC-1400 24" x 24" x 12" $489.49
SBC-1402 - with 2 tiling flanges 24" x 24" x 12" $490.17
SBC-1425 32" x 32" x 12" $621.12
SBC-1450 36" x 36" x 12" $751.62
Speedi Drain Connectors/Rubber Gaskets - required for these mop sinks
TC-3
For XHCI, plastic and steel pipe
3" $14.29
TC-3-NH
For SV and NHCI pipe
3" $14.32
TC-3-2
Reducer with 2" hole
3" $19.16
Faucet For Mop Sinks - Find more mop sink faucets here
T-15-VB - Mop sink faucet - polished chrome $163.87

Due to weight and to ensure safe delivery, these mop sinks ship by truck and have a $175 additional shipping fee.
Please select your type of address: Commercial -or- Residential

- Or -
View Button



The "Crescent" Mop Sinks
Crescent mop sink CRS-2200
Crescent CRS-2200
The Crescent CRS-2200 was designed around the two features most sought after by today's style and function conscious specifications.

SPACE EFFICIENT - radial designed corner model that occupies minimum floor space.

MAXIMUM UTILITY - 6" front drop with stainless steel cap that facilitates dumping of power equipment and reduces lifting of conventional equipment.

If you would like to add splash guard panels to your sink, you can find them here.

View the Crescent mop sink dimensions
Model No. Overall Dim. Price & Quantity
Crescent Mop Sinks - w/ Stainless Steel Cap
Note: Must order Speedi Drain Connectors sold separately below
CRS-2200 28" x 28" x 12" $576.00
CRS-2202 - with 2 tiling flanges 28" x 28" x 12" $574.70
Crescent Mop Sinks - LESS Stainless Steel Cap
Note: Must order Speedi Drain Connectors sold separately below
CRS-2210 28" x 28" x 12" $498.92
Speedi Drain Connectors/Rubber Gaskets - required for these mop sinks
TC-3
For XHCI, plastic and steel pipe
3" $14.29
TC-3-NH
For SV and NHCI pipe
3" $14.32
TC-3-2
Reducer with 2" hole
3" $19.16
Faucet For Mop Sinks - find more mop sink faucets here.
T-15-VB - Mop sink faucet - polished chrome $163.87

Due to weight and to ensure safe delivery, these mop sinks ship by truck and have a $175 additional shipping fee.
Please select your type of address: Commercial -or- Residential

- Or -
View Button



The "Elfin" Mop Sinks
Elfin mop sink EB-54
Elfin EB-54
The Elfin is a rugged economical unit with plain curbs on all sides. It is installed quickly in one single operation on the finished floor. All models except the corner unit come with a 3" centered brass drain with removable flat stainless steel strainer and screws. The drain for the corner model is located 12" off the back walls to help avoid spills. This unit can be furnished with aluminum or vinyl bumper guards, OR cast integral stainless steel caps, on the exposed sides of the basin.

The Elfin is available in four square models, two rectangular, and one corner model.

If you would like to add splash guard panels to your sink, you can find them here.

View the Elfin SQUARE sink dimensions
View the Elfin RECTANGULAR sink dimensions
View the Elfin CORNER sink dimensions
Elfin mop sink EBR-66
Elfin EBR-66
Elfin mop sink EBC-150
Elfin EBC-150
Model No. Overall Dim. Price & Quantity
Elfin SQUARE Mop Sinks
Note: Must order Speedi Drain Connectors sold separately below
EB-54 24" x 24" x 6" $389.90
EB-66 30" x 30" x 6" $399.26
EB-70 32" x 32" x 6" $410.70
EB-78 36" x 36" x 6" $460.16
Elfin RECTANGULAR Mop Sinks
Note: Must order Speedi Drain Connectors sold separately below
EBR-66 36" x 24" x 6" $430.80
EBR-74 36" x 32" x 6" $480.29
Elfin CORNER Mop Sinks
Note: Must order Speedi Drain Connectors sold separately below
EBC-150 36" x 36" x 6" $429.68
Bumper Guards - for these mop sinks only
V-70-24 Extruded Vinyl 24" $24.95
V-70-36 Extruded Vinyl 36" $26.95
A-20-24 Aluminum 24" $44.49
A-20-32 Aluminum 32" $47.95
A-20-36 Aluminum 36" $51.95
Speedi Drain Connectors/Rubber Gaskets - required for these mop sinks
TC-3
For XHCI, plastic and steel pipe
3" $14.29
TC-3-NH
For SV and NHCI pipe
3" $14.32
TC-3-2
Reducer with 2" hole
3" $19.16
Faucet For Mop Sinks - find more mop sink faucets here.
T-15-VB - Mop sink faucet - polished chrome $163.87

Due to weight and to ensure safe delivery, these mop sinks ship by truck and have a $175 additional shipping fee.
Please select your type of address: Commercial -or- Residential

- Or -
View Button



The "MTB" Mop Sink
MTB mop sink MTB-2424
MTB-2424
MTB mop sink MTB-3624
MTB-3624
View the MTB-2424 sink dimensions View the MTB-3624 sink dimensions
The MTB was designed to fill the need for a mop sink in a lower price range, but with good splash protection. It is not equipped with tiling flanges, so sealant should be applied where basin meets the wall. Each exposed side can be equipped with vinyl or aluminum bumper guards, OR cast integral stainless steel caps. Please see the accessories section for additional information on the bumper guards. We offer the MTB in two sizes, both of which have 3" centered brass drains cast integral and a stainless steel dome strainer and screws.

If you would like to add splash guard panels to your sink, you can find them here.

Model No. Overall Dim. Price & Quantity
MTB-2424 - SQUARE Mop Sink
Note: Must order Speedi Drain Connectors sold directly below
24" x 24" x 10" $439.48
MTB-3624M - RECTANGULAR Mop Sink
Note: Must order Speedi Drain Connectors sold directly below
36" x 24" x 10" $459.95
Speedi Drain Connectors/Rubber Gaskets - required for these mop sinks
TC-3 - For XHCI, plastic and steel pipe 3" $14.29
TC-3-NH - For SV and NHCI pipe 3" $14.32
TC-3-2 - Reducer with 2" hole 3" $19.16
Faucet For Mop Sinks - find more mop sink faucets here.
T-15-VB - Mop sink faucet - polished chrome $163.87

Due to weight and to ensure safe delivery, these mop sinks ship by truck and have a $175 additional shipping fee.
Please select your type of address: Commercial -or- Residential

- Or -
View Button



The "Serviceptor" Mop Sinks
Serviceptor mop sink SB-902
Serviceptor SB-902
The most complete line of terrazzo Serviceptors for corner, recessed, pier or island installations, we offer models in a choice of 4 sizes. All sinks are available with plain shoulders or integrally cast 20 gauge continuous stainless steel cap.
  • Terrazzo composed of pearl gray marble chips cast in white Portland cement which produces a compressive strength of 3000 PSI seven days after casting; then ground smooth, grouted and sealed to resist stains and moisture.
  • Integral brass drain body is cast in production and provides for a caulked connection of not less that 1" deep to a 3" pipe. Drain is centered on all models and comes with a flat stainless steel strainer and screws.
  • Installs on the finished floor
  • If you would like to add splash guard panels to your sink, you can find them here
View the Serviceptor SQUARE sink dimensions
View the Serviceptor RECTANGULAR sink dimensions
Serviceptor mop sink SB-302-L
Serviceptor SB-302-L
Serviceptor mop sink SB-202-R
Serviceptor SB-202-R

w/ Continuous One-Piece Stainless Steel Cap

Model No. Overall Dim. Flanges Price & Quantity
Serviceptor SQUARE Mop Sinks
Note: Must order Speedi Drain Connectors sold separately below
SB-900 24" x 24" x 12" 0 $628.50
SB-901 24" x 24" x 12" 1 $626.74
SB-902 24" x 24" x 12" 2 $628.47
SB-903 24" x 24" x 12" 3 $627.62
SB-700 32" x 32" x 12" 0 $898.02
SB-701 32" x 32" x 12" 1 $900.09
SB-702 32" x 32" x 12" 2 $900.36
SB-703 32" x 32" x 12" 3 $902.02
SB-500 36" x 36" x 12" 0 $999.75
SB-501 36" x 36" x 12" 1 $998.05
SB-502 36" x 36" x 12" 2 $998.50
SB-503 36" x 36" x 12" 3 $997.95
Serviceptor RECTANGULAR Mop Sinks
Note: Must order Speedi Drain Connectors sold separately below
SB-300 36" x 24" x 12" 0 $779.18
SB-301 36" x 24" x 12" 1 $780.39
SB-302-L* 36" x 24" x 12" 2 $780.39
SB-302-R* 36" x 24" x 12" 2 $779.06
SB-303 36" x 24" x 12" 3 $781.68
Speedi Drain Connectors/Rubber Gaskets - required for these mop sinks
TC-3
For XHCI, plastic and steel pipe
3" - $14.29
TC-3-NH
For SV and NHCI pipe
3" - $14.32
TC-3-2
Reducer with 2" hole
3" - $19.16
Faucet For Mop Sinks - find more mop sink faucets here.
T-15-VB - Mop sink faucet - polished chrome $163.87

* Flange is across back and on LEFT side on model numbers ending in "L"
Flange is across back and on RIGHT side on model numbers ending in "R"

Due to weight and to ensure safe delivery, these mop sinks ship by truck and have a $175 additional shipping fee.
Please select your type of address: Commercial -or- Residential

- Or -
View Button

LESS Caps, w/ Plain Shoulders

Model No. Overall Dim. Flanges Price & Quantity
Serviceptor SQUARE Mop Sinks
Note: Must order Speedi Drain Connectors sold separately below
SB-800 24" x 24" x 12" 0 $490.07
SB-801 24" x 24" x 12" 1 $490.56
SB-802 24" x 24" x 12" 2 $489.56
SB-803 24" x 24" x 12" 3 $489.98
SB-600 32" x 32" x 12" 0 $639.87
SB-601 32" x 32" x 12" 1 $638.66
SB-602 32" x 32" x 12" 2 $641.28
SB-603 32" x 32" x 12" 3 $640.83
SB-400 36" x 36" x 12" 0 $783.25
SB-401 36" x 36" x 12" 1 $780.91
SB-402 36" x 36" x 12" 2 $782.70
SB-403 36" x 36" x 12" 3 $780.75
Serviceptor RECTANGULAR Mop Sinks
Note: Must order Speedi Drain Connectors sold separately below
SB-200 36" x 24" x 12" 0 $610.37
SB-201 36" x 24" x 12" 1 $611.28
SB-202-L* 36" x 24" x 12" 2 $611.31
SB-202-R* 36" x 24" x 12" 2 $609.63
SB-203 36" x 24" x 12" 3 $609.82
Speedi Drain Connectors/Rubber Gaskets - required for these mop sinks
TC-3
For XHCI, plastic and steel pipe
3" - $14.29
TC-3-NH
For SV and NHCI pipe
3" - $14.32
TC-3-2
Reducer with 2" hole
3" - $19.16
Faucet For Mop Sinks - find more mop sink faucets here.
T-15-VB - Mop sink faucet - polished chrome $163.87

* Flange is across back and on LEFT side on model numbers ending in "L"
Flange is across back and on RIGHT side on model numbers ending in "R"

Due to weight and to ensure safe delivery, these mop sinks ship by truck and have a $175 additional shipping fee.
Please select your type of address: Commercial -or- Residential

- Or -
View Button



Take a look at these products, too:
to ADA compliant showers - to check valves for floor drains
to adjustable drain products - to adjustable drain installation instructions



Splash Catcher Panels / Wall Guards
Features:
  • 20 gauge stainless steel for durability
  • Prevents unwanted splashing
  • Helps protect your wall from rotting
  • 12" high
  • Lengths available in different sizes to meet your needs
Add some protection to the walls surrounding your mop sink with a single, double, or triple paneled splash guard. Keep your work area neat and the walls damage-free with this simple to install option for protecting drywall and wood surfaces. Also great for keeping water from getting behind the sink, these panels can help prevent mold and water damage, which will save you money down the road.
Single Panel
Size Part # Price & Quantity
24" BP-1-24 $69.72
28" BP-1-28 $69.53
32" BP-1-32 $69.88
36" BP-1-36 $69.70
Double Panels
Size Part # Price & Quantity
24" BP-2-24 $149.07
28" BP-2-28 $149.71
32" BP-2-32 $149.46
36" BP-2-36 $149.26
Triple Panels
Size Part # Price & Quantity
24" BP-3-24 $232.92
28" BP-3-28 $232.57
32" BP-3-32 $232.57
36" BP-3-36 $232.33
- Or -
View Button



Side & Rear Splash Guards For 9-OP Series (Floor) Mop Sinks
Features:
  • Constructed of 16 gauge stainless steel for durability
  • Prevents unwanted splashing and improves sanitation by containing the spillage of waste water
  • Helps protect your wall from rotting
  • 16" Tall
If you're looking for extra protection from splashing and the water damage that accumulates with dumping and filling a mop bucket, these 16" high splash guards are a long-term solution to consider. Designed to contain clean and dirty water within the sink area, these panels will protect the surrounding wall from water damage and add a cleaner appearance to the mop sink itself.
Side & Rear Splash Guards
Part # Description Fits Models Price & Quantity
K-290R 16" Right & Rear Splash Guards 9-OP-20 & 9-OP-48 $504.00
K-290L 16" Left & Rear Splash Guards 9-OP-20 & 9-OP-48 $501.48
K-298 16" Right, Left & Rear Splash Guards 9-OP-20 & 9-OP-40 $675.06
K-299 16" Right, Left & Rear Splash Guards 9-OP-28 & 9-OP-48 $671.93
- Or -
View Button



Mop Sink Faucet
mop sink faucet
This mop sink faucet features:
  • Excellent engineering design and high-quality craftsmanship inside and out.
  • Integral spring check valves to prevent cross-flow of hot and cold water.
  • Heavy duty brass construction and polished chrome body.
  • Color coded red and blue handles.
  • Includes heavy duty bucket hook.
  • 8" Centers
  • 3/4" MHT spout
  • 5" spout, vacuum breaker and wall bracket with 12" rod.
  • 1/2" NPT female inlets.
  • Please note: This mop sink faucet is NOT manufactured in the USA.
Mop Sink Faucet = $141.88
- Or -
View Button



Mop Sink Faucet
mop sink faucet T-10VB
This mop sink faucet features:
  • Fitting with vacuum breaker
  • Adjustable top brace
  • 3/4" hose thread on spout with bucket hook inlets 8" on center
  • Rough chrome or polished chrome finish
Model No. Description/Finish Price & Quantity
T-10-VB Mop Sink Faucet - Rough Chrome $114.80
T-15-VB Mop Sink Faucet - Polished Chrome $163.87
- Or -
View Button



Mop Sink Faucet

mop sink faucet
This mop sink faucet features:
  • Durable rough-chrome finish
  • 6-1/2" Spout length
  • 3/4" MHT end spout
  • Front bucket hook included
  • 8" Centers
  • Service faucet with vacuum breaker
  • Meets state and federal low lead laws
Model # K-240-CA - Mop Sink Faucet = $450.84
- Or -
View Button

to Fisher service sink faucets - to Speakman service sink faucets - many more quality faucets




Hose for Mop Sink
mop sink hose
This mop sink hose features:
  • Hose and wall hook
  • 36" long
  • 3/4" chrome couplings
  • Stainless steel wall bracket
Model # T-35 - Mop Sink Hose = $39.75
- Or -
View Button



Stainless Steel Mop Hanger
mop hanger
24" long w/ 3 rubber spring loaded clips
Model # T-40 - Mop Hanger = $74.95

- Or -
View Button



Hot Water Hose

View larger image
Features:
  • Works great for filling mops sinks with hot water
  • Can withstand temperatures up to 180°F
  • 500 PSI burst pressure
  • Extra durable crush resistant couplings (5/8" I.D.)
  • Great for use in: commercial duty, farm equipment, home or business
  • Please note: This hot water hose is NOT manufactured in the USA.

Item Description Price & Quantity
Hot Water Hose - 5/8" x 25ft. $26.93
Hot Water Hose - 5/8" x 50ft. $44.97

- Or -
View Button



Don't forget to check out these related products:
Adjustable Wall Mount Service Sink Faucet
more service sink faucets
backflow prevention
backflow prevention
Waste Valve
drain waste valves

Grease Trap index page
interceptors index page
Sewage Packages
sewage ejector packages
Commercial Roof Hydrants
freezeless roof hydrants




Please note: While we strive to ensure every product we label as "Made in the USA" really is 100% made in the USA, it is also important to understand that sometimes manufacturers make changes to their products, or for various reasons may receive components or materials that they would normally purchase domestically from an overseas supplier - and they don't necessarily let distributors (like us!) know that they've changed something about the product or where it is manufactured.

If you receive a product that PlumbingSupply.com® says is "Made in the USA" and the product states it was manufactured elsewhere, please contact us. We will happily replace or refund your purchase to your satisfaction.

Frequently Asked Questions

Q. "What do the different types of stainless steel (304, 316, etc) mean?"
A. The term "stainless steel" refers to specific grades of steel that contain more than 10% chromium. Stainless steel may also include a variety of other elements (such as nickel, titanium, molybdenum, etc); it resists corrosion and is generally a stronger, more reliable steel. The most common grades of stainless steel are:

Type 304: Aside from having a higher content of chromium than most other types of stainless steel, type 304 also contains nickel; this enables it to withstand most ordinary corrosion in architecture, is durable in typical food processing environments, and resists most chemicals.

Type 316: Similar to type 304, but also contains a small amount of molybdenum, which is an alloy element #304 does not contain (but one that provides even stronger resistance to some deterioration). Types 304 and 316 are grades of stainless steel that are most often used in plumbing, as well as in the manufacturing of kitchen utensils and sinks.

Type 409: Does not contain virtually any nickel at all, but also is the stainless steel that contains the least amount of chromium. Type 409 is more suitable for high temperature applications, which is why it's often used in automotive trim and exhaust systems, or hot water tanks.

Type 410: Also does not contain any significant nickel; its primary difference to type 409 stainless is characterized by the use of heat treatment for hardening and strengthening. Type 410 is not appropriate for severely corrosive applications, but used instead in environments that require high strength; this is why it's the type of stainless steel that's often used in surgical equipment.

Type 430: Another plain-chromium stainless steel, similar to type 409, but is usually used in decorative applications.



return to top ↑

We hope that we have helped you on this page with mop sinks and faucets,
and thank you for helping to make PlumbingSupply.com® the most famous Internet plumbing supplier.


Fun, inspirational quote of the day:
"Early to bed and early to rise, Makes a man healthy, wealthy and wise."
- Benjamin Franklin



Is there something else that you are looking for?

Enter search terms:

OR - find plumbing supplies starting with: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z



Easy payment methods