|Our motto: "under-promise...over-perform"|
Simple, straightforward and low shipping rates for these folding shower seats.
Q. "What is the difference between Phenolic, & Naugahyde?"
A. Phenolic is a hard, dense material that is light weight, and incredibly strong. Naugahyde is a synthetic, leather-like material.
Q. "What is the maximum weight capacity for these seats?"
A. When properly installed, all Seachrome shower seats have been designed and manufactured to support loads exceeding the downward pull requirements for Federal specifications FHA, VA, HUD, hospital codes, and private construction. The actual "in use" load bearing capacity of any shower seat, however, will be limited by the strength of its mounting surface and installation hardware. Seachrome recommends that shower seats be installed using 2" minimum thickness "in wall" solid wood backing material with #10 x 2" stainless steel, phillips-head, sheet metal screws, or using a wall embedded, minimum 12 ga. (2.8mm) steel anchor plate with #10 x 24 stainless steel machine screws. Please contact the factory for further mounting recommendations. Under no circumstances should any shower seat be mounted to drywall, sheetrock, plaster, fiberglass, acrylic or other similar "hollow" wall surfaces without appropriate wood or steel backing material.
Q. "How much do the EXTRA HEAVY seats support?"
A. For EXTRA HEAVY load requirements, we recommend These ADA compliant seats. These seats will support in excess of 900 pounds of force, when properly installed.
We hope that we have helped you on this page with handicap folding shower seats,
and thank you for helping to make PlumbingSupply.com® the most famous Internet plumbing supplier.
Is there something else that you are looking for?