High Temperature Commercial Drain Pumps
by Liberty

These Liberty commercial drain pumps are specially designed for reliable performance in high-heat, high temperature situations. Featuring QuickTree™ technology, these pumps have a separate access cover for easy switch inspection. For gray wastewater applications, this commercial drain pump is perfect for laundry trays, multi-compartment sinks, bar sinks, utility sinks, and dishwashers, and allows you the freedom to install fixtures where gravity drain lines are not available. Comes fully assembled and ready to install.

Commercial Drain Pumps
Model 405 drain pump	Commercial Drain Pump Features: For gray wastewater applications where drainage is needed and you're unable to rely on gravity lines to drain Factory pre-assembled, ready to install Fully automatic operation Handles fluid temperatures to 180°F QuickTree™ technology allows quick inspection and removal of float switch without disconnecting the plumbing Integrally molded rubber gaskets for a superior gas-tight seal 10' Power cord with ground plug Corrosion-resistant polyolefin (plastic resin) basin with molded-in connections Maintenance-free, permanently lubricated sealed bearings Available in 115v or 230v models Maximum vertical lift (Shut-off) at 34' 1/2 hp @ 3450RPM pump Stainless steel pump shaft 3/8" Solid-Handling 2" FPT inlet 2" FPT discharge 2" FPT vent
Model #405 - 115v, 7.3 Amp Commercial Drain Pump = $387.62
Model #405 - 230v, 3.5 Amp Commercial Drain Pump = $407.86

Please note: this item is not intended for use with high concentrated or acidic chemicals

- Or -

Additional Specifications

Dimensional Data

Height: 14-1/8"
Width: 13-3/4"
Weight: 23 LBS.
Inlet Height: 12-5/8"
Total Capacity: 5.5 Gallons

Motor Specifications

1/2 Hp.
115v / 60Hz / 7.3a (115v Model)
230v / 60Hz / 3.5a (230v Model)
3450 RPM
Oil Filled, Thermally Protected

Performance Curve

Cast-Iron High Temperature Handling Check Valves
	These check valves feature: Heavy duty cast-iron body High temperature rubber flapper - handles up to 200°F 125 PSI rated Flexible: Vertical or horizontal installation Female NPT connections

#HCV200 2" FNPT Cast-Iron High Temperature Check Valve =

$70.31

- Or -

Ball / Check Combination Valves
	These check valves feature: Ball/check combo provides compact design Constructed out of heavy duty PVC 125 PSI rated Vertical or horizontal installation Includes a union for easy disassembly Glue on connection

#BCV200 2" Ball/Check Valve Combination =

$59.76

- Or -

Frequently Asked Questions

Q. "What is the QuickTree™ System?"
A. The QuickTree™ System includes a stainless steel float tree, pre-mounted pump float and an additional clamp for an alarm float. The tree hangs down from its holder underneath the basin cover, allowing easy access and removal of switches without disturbing the pump or other plumbing.

Q. "Do I need to install a vent pipe to the tank?"
A. It really depends on how you plumb the piping to the tank and each situation is different. In many cases with any brand of sealed tank the simple answer is yes as you need air to displace the volume of discharge. An AAV may be used in many areas of the country but local codes always prevail and so best to check with your local code authorities before purchasing the enclosed tank system/s such as these shown on this page.

return to top ↑

We hope that we have helped you on this page with automatic drain pumps,
and thank you for helping to make PlumbingSupply.com the most famous Internet plumbing supplier.

One of many great quotes you'll find on our web site:
Cleaning your house while your kids are still growing is like shoveling the walk before it stops snowing.
- Phyllis Diller

Is there something else that you are looking for?

OR - find plumbing supplies starting with: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

High Temperature Commercial Drain Pumpsby Liberty

High Temperature Commercial Drain Pumps
by Liberty